VEVOR Steel Landscape Edging, 6-pack Steel Garden Edging Borders, 40" L x 8" H Strips, Hammer-in Edging Border with 8 Clips, Bendable Metal Landscape Edging for Yard, Garden, Lawn

8 inches includes the height of the teeth. The height of the teeth is 3.15 inches.

Yes it can be cut and bent for corners. I used an angle grinder to cut it and used a finishing wheel to smooth out the cut metal end.

The 14 gauge metal can be cut with an angle grinder.

Hi Nancy, they do not provide corner pieces. You have to bend the pieces to make corners. I used two 2x4's held together with a C-Clamp. With a piece of the edging between the wood pieces, tightened the clamp, put on work gloves, and bent the edging by hand, then finished the bend with a mallet. This makes a good enough corner. Make sure you have enough edging to bend corners and overlap to have the enclosure size you need.. The provided stakes hold everything together

You can bend the edging 90 degrees and put the joint in a straight run rather than putting the joint in a corner.

I bought used and had the same problem. I ordered some. They were 10" and much better than the 6" ones that come with the edging