Home Appliances Small Kitchen Appliances Dessert Makers Commercial Popsicle Machine

VEVOR Commercial Popsicle Machine Single Model Set Commercial Ice Pop Machine 40 Pcs Ice Lolly Making Machine Stainless Steel Popsicle Making Machine with Lollipop Set for Bars, Cafes, Milk-Tea Stores

Questions and Answers

80 Questions

1. can we use propylene glycol instead of calcium chloride? 2. the volume of the propylene glycol is 3.8 liters (1 gallon) 3. we want to achieve a -25c freezing point on the machine to get 20 min cycles. How much water do we add to the mixture?

Answer This Question

For antifreeze, please consult a qualified antifreeze seller. Antifreeze with a freezing point below -35℃ can be used. As long as the seller confirms that the freezing point is below -35 degrees, you can use it directly without adding water. In addition, the required antifreeze capacity is 16L.

By vevor

Helpful? 10

Where do I put the water/calcium chloride solution? I see a hole but no tank and no drain. On model BBJ-1A.

Answer This Question

You can disassemble the machine enclosure, and then you will find a valve, unscrew the valve, you can discharge the calcium chloride solution.

By vevor

Helpful? 8

How do I buy extra 40 piece molds like the one that comes with the machine. I dont see it anywhere as an option. I would like to buy a few extra ones to keep an efficient line moving.

Answer This Question

Thank you for sharing.

By vevor

Helpful? 6

See More (2)

1. How does this make 3,000 a day with only making 40 pops per mould? 2. Is there an ability to choose the mould shapes?

Answer This Question

Hello, 3,000 is the data tested by the machine working 24 hours a day. Currently, there are only the molds that come with the product, and there are no other options.

By vevor

Helpful? 6

how long does machine take to produce 40 pops ?

Answer This Question

It takes about 40-50 minutes for the first time and about 20 minutes each time after that.

By vevor

Helpful? 5