VEVOR Dividing Head BS-0 5Inch 3 Jaw Chuck Dividing Head Set Precision Semi Universal Dividing Head for Milling Machine Rotary Table Tailstock Milling Set (5 Inch Chuck)
5 Inch
Questions and Answers
50 Questions
Can you get gears for differential indexing?
It comes with 3 indexing plates for any combination you might need. The most important thing you need to do before using is take it completely apart including the chuck and deburr , clean and put in some good grease and oil, it is horrendously dirty inside, otherwise it seems of good quality.
By vevor
Are instructions included? Been over 20 years since I've used an indexing head. Do they expiration the plate setup well?
Can a stepper motor be connected to this head for use with a CNC?
Hi, I receive the turning table , We need to switch the chuck to another one with 4 jaws , i got Vevor Dividing Head BS - 0 5Inch 3 Jaw Chuck
If you want to swap the chuck, you could adapt the back plate of the chuck that is in the dividing head to a 4 jaw chuck. The chuck is a standard K- series chuck. If you get lucky, you might not have to even drill holes in it.
By Barlow Billy
What is the total height at 90 degrees?
