VEVOR Auto Glue Dispenser Dual Controller 24V DC Solder Paste Glue Dropper 982A Digital Display Solder Paste Liquid Adhesive Controller Dropper Machine

The listing is about glue dispenser, solder paste liquid dropper controller, with two controlling modes: manual and automatic. Professional precise glue dispenser system, assure more humanized function, higher efficiency with better quality, simpler operation, easier coating, lineation and drop.

NOTE

Please read the Operating Instruction carefully before using the machine.

The barrel should be cleaned in time after the work finished.

• Durable Material

Metal material, perfect design. The exquisite and luxurious ion plating process, combined with the spray design, is more anti-slip and scratch-resistant. The polished outer casing is rust resistance, easy to clean and durable.

• Two Controlling Modes

The glue dispenser features two controlling modes: manual mode and auto mode. Controlled by the foot pedal or automatic timing dispensing, you can choose the method which you want to operate it.

• Precise Control

Precise control of dispensing drops and dispensing cycle. Flexible adjustment state of manual, semiautomatic, digital timing controller with high precision, precision control for each titration time, accurate to milliseconds, properly control the liquid flow rate, never waste liquid.

• Suck-back Function

Equipped with vacuum suction back function. The suck-back function is used to ensure no leakage drops but not for sucking glue. This controller could not suck glue.

• For Different Liquid

The machine suits for dispensing different liquid: solder paste, quick-drying glue, red glue, anaerobic adhesive, silica gel, yellow glue, silver paste, lubricating oil, epoxy resin, screw locking glue, soldering flux, ink and other liquid material.

• For Different Industries

Widely used on electronics, aviation, optics, chemistry, automobile, medical treatment, petroleum, packaging, jewelry and machinery industry. Can be used for electronic components, digital products, integrated circuit, mechanical components, chassis bonding, seal, etc.

• Product: Glue dispenser
• Model: 982
• Control mode: Manual , auto mode
• Timer: Programmable: 0.01-1 S, 0.1-10 S, 0.2-20 S, 0.3-30 S
• Manual mode: Continuous / momentary
• Repeat tolerance: ±0.5%
• Voltage input: AC 110V, 60Hz
• Internal voltage: 24V DC
• Minimum deposit: 0.01 ml
• Air input: 2.5 to 7 bar (35 to 100psi)
• Air output: 0.1 to 5.5 bar (1 to 78psi)
• Dimensions: 235x225x63 mm
• Host weight: 2 kg (4.41 lbs)
• Package size: 29x25x16 cm (11.42x9.84x6.30 inch)
• Gross weight: 2.56 kg (5.64 lbs)

• 1 x Main Unit
• 1 x Dispenser Stand
• 1 x Air Tube for Supplying Air
• 3 x 30cc Liquid Barrels
• 1 x Air Tube to Barrel
• 6 x Steel Needle/Tips
• 6 x Plastic Plastic Tips
• 1 x Power Cable
• 1 x Hand Switch
• 1 x Foot Pedal Switch
• 1 x Operating Instruction