Select the country/region, language, and currency you prefer for shopping.

Press Tools

Price
50 ~ 100
100 ~ 200
200 ~ 500
500 & Above
Customer Rating
5 stars only
4 stars and up
3 stars and up
2 stars and up
1 star and up
Special Offers
On Sale
Bulk Savings
In Stock
Pickup
Black Friday
Black Friday
New
VEVOR R8-32 Press Actuator, Works with 1/2", 3/4", 1" & 1-1/4" Press Rings, Compatible with VUS Copper Pipes, Suitable for 32KN Standard & Extended Press Tool, 60HRC Hardened Steel (Ring NOT Included)
(19)
95.9
95.9
Deal after registering
Member discounted price
0% cash back at checkout.
95.9
Non-PRO Account
95.9
Save
Non-PRO Account
510 Views Recently
You May Also Like
Recently Viewed

Results for  Press Tools

A press jaw is a hardened steel pressing tool that clamps around a pipe fitting and, driven by a powered press tool, squeezes it onto the pipe to form a permanent, leak-tight mechanical joint. The jaw transfers the press tool's force evenly around the fitting so the connection seats in a single pressing cycle, with no flame, solder, or threading. Each jaw is profiled to match a specific fitting style and size, and larger connections are made the same way using a press ring closed by an actuator. The result is a consistent, repeatable joint produced in seconds.


VEVOR press jaws cover three fitting systems and a few form factors. VMP jaws press MegaPress carbon-steel fittings, VUS jaws press ProPress copper fittings, and RLS jaws press copper fittings for high-pressure HVAC/R lines. Alongside the single profiled jaws you will find multi-piece jaw sets, complete pressing kits that bundle jaws or rings with an actuator and case, and press rings with a matching actuator for larger diameters. Jaws are built for either 32KN standard-class or 24KN compact-class press tools, with hardened (52 HRC) profiles for repeated use. Typical uses are plumbing water lines, commercial HVAC, gas-rated carbon-steel runs, and refrigerant piping.


Five things decide what you need:


  • Fitting system: match the jaw to the fitting brand and material, VMP for MegaPress carbon steel, VUS for ProPress copper, RLS for high-pressure copper.
  • Press tool class: confirm whether your tool is 32KN standard or 24KN compact, because jaws and actuators are built for one or the other.
  • Pipe size: single jaws cover one diameter, while kits and ring sets span a range such as 1/2 inch to 2 inch in one case.
  • Jaw versus ring: jaws press smaller fittings directly, press rings plus an actuator handle the larger diameters a jaw cannot reach.
  • Single piece or kit: buy one jaw to fill a gap in a set, or a full kit when you are outfitting a tool from scratch.

Browse the full range of press tools to match jaws, rings, and actuators to your press tool, or explore the wider crimping tools selection for related pressing accessories.


Mega Press Jaw Types at a Glance


Technicians who buy these tools week in and week out sort them first by fitting system and tool class, so this table lines up each jaw type against the fitting it presses and the actuator it needs.


Jaw / Accessory Type Fitting System Pipe Material Actuator Needed Selection Note
VMP press jaw MegaPress Carbon steel Built into jaw; press tool only The only carbon-steel option here; the choice for gas-rated and steel water lines
VUS press jaw ProPress Copper Built into jaw; press tool only Presses copper fittings directly; the everyday plumbing pick for common sizes
RLS press jaw RLS (copper) Copper, HVAC/R Built into jaw; press tool only Rated for high-pressure refrigerant work the water-line jaws are not
Press ring set ProPress Copper Separate actuator required Reaches larger diameters a jaw cannot close; pair with the matching actuator
Press actuator ProPress Works with rings Is the actuator Buy to drive press rings; useless on its own, so confirm you own the rings
Pressing kit MegaPress or ProPress Carbon steel or copper Included in kit Most complete start; jaws or rings, actuator, and case in one purchase

VEVOR Mega Press Jaws – Heavy‑Duty Pressing Power


Pipe installations may involve using tools to ensure good, leak-free connections. The VEVOR mega press jaws are used in plumbing, commercial HVAC systems, and commercial industrial piping to assist professionals in the effortless, timely, and secure development of fittings. In place of welding or soldering, modern press jaw technology makes creating pipe alliances easier without compromising durability. The technicians can achieve consistent outcomes across various piping systems with the Pro Press jaws and compatible Ridgid press jaws.


VEVOR Mega Press Jaws|Performance Benefits and Features


These are the characteristics and strengths that make VEVOR the best.


Close Construction: Stable operations are a key trait of VEVOR mega press jaws. These tools are designed to meet professional requirements in challenging work environments and offer a blend of strength, precision, and convenience.


Strong Material: They have a strong construction, which is one of their benefits. Press jaws are made of hardened steel and do not fail structurally even after repeated high-pressure pressing. Such resistance enables technicians to use the same press jaws on long-term projects without fear of wear or deformation.


Precision Design: The other advantage is precision engineering. The pro press jaw is made from high-quality materials and is molded to ensure even compression of the pipe fittings. It guarantees strict seals and proper performance in plumbing and HVAC systems. Due to this precision, press jaws are commonly used in systems where precise connections are important.


Extensive Diversity: Diversity is also important. Most professionals need devices that handle both copper and carbon-steel pipes. Technicians can operate on various types of piping materials with well-crafted mega press jaws and remain efficient. Certain models can also be fitted with equipment tooling compatible with Ridgid press jaws, making them flexible to integrate with existing equipment.


Quick installation: Installation efficiency is another factor professionals use in favor of pressing systems. That eliminates the need for soldering or welding, as rigid press jaws or similar pressing tools can be used to complete the process. The technicians can complete the pipe connections quickly, saving labor time and enhancing overall productivity.


Portable Storage: The usability is further improved by portability and organization. Most VEVOR kits come with several pro press jaws, packaged in discreet carrying cases so that technicians can carry their tools around job sites without any problems. This structured arrangement ensures that the size of press jaws is always readily available when required.


Matching Press Jaws to the Job


On a real job the question is not what a jaw is made of but which setup gets a given line pressed and signed off, so this table pairs each task with its system and flags the gotcha that trips people up.


Installation Task Jaw / Fitting System Press Tool Class What to Watch For
Residential copper water lines VUS (ProPress) jaws 24KN compact Compact tools fit tight joist bays; confirm the jaw is the compact, not standard, version
Carbon-steel gas or water runs VMP (MegaPress) jaws 32KN standard or 24KN compact Carbon steel needs the VMP profile; a copper jaw will not seal a steel fitting
Refrigerant and HVAC/R lines RLS jaws 24KN or 32KN Only RLS jaws carry the high-pressure rating; do not substitute a water-line jaw
Larger diameters up to 2 inch Press rings plus actuator Match actuator to tool class The jaw stops where the ring starts; budget for the actuator if you do not own one
Mixed-size first-fix on one tool Multi-size pressing kit Buy the kit built for your class Kits are class-specific; a 32KN kit will not drive a 24KN compact tool and vice versa

VEVOR Mega Press Jaws Care and Maintenance


The VEVOR mega press jaws require care and maintenance to ensure normal press performance and the long life of the tools. It is also possible to assist the technician in preserving precise pipeline connections by frequent repairs to prevent unwarranted wear when faced with challenging plumbing or machining demands.


Regular Cleaning: Cleaning the press jaws after each use should remove dust, metal particles, and traces of oil. An accumulation that can affect pressing precision can be prevented by wiping the surface with a dry cloth.


Routine Inspection: Technicians should check the mega press jaw before and after use to observe cracks, deformation, and/or worn-out contours of the parts used in the pressing process. Presses that are incomplete will be prevented by early inspection, and safety will be enhanced.


Lubrication of Moving Parts: Wasting a small amount of lubricant on pivot joints and moving parts is advised to ensure smooth jaw operation. Friction will be reduced, and uniform pressing pressure will be guaranteed through lubrication.


Proper Storage: The press jaws will be stored in their respective carrying cases to avoid exposure to dust and damage from careless handling. The technicians can also locate the correct jaw size without any hassles when carrying out installation projects through systematic storage.


Avoid Overloading: A corresponding pressing tool is applied to prevent excess pressure on the jaws and to ensure the proper pipe size. The structural integrity of the press jaws can be ensured by following the manufacturer's recommendations.


Professional Check now and then: When tools are frequently used at the workplace, professional examination would be infrequent; ensure that the pressing contours are accurate and that the jaws can deliver quality output.


Proper maintenance not only extends the life of mega press jaws but also enables safe, accurate, and efficient pipe pressing in the plumbing, HVAC, and industrial sectors.


Best-Seller Comparison


When a buyer is down to a shortlist, what settles it is which exact kit or jaw suits the fitting, the tool they already own, and the sizes they press most, so these five top sellers are lined up on those axes.


Product Fitting System Pipe Size Range Pieces Included Tool Class Case Best For
7PCS MegaPress Kit, 1/2" to 2" MegaPress (VMP) 1/2" to 2" 3 jaws, 3 rings, 1 actuator 32KN standard Yes Widest size span here; the one-box answer for carbon-steel first-fix
5PCS ProPress Kit, 180° R8 ProPress (VUS) 1/2" to 1-1/4" 4 rings, 1 R8 actuator 32KN standard Yes Only ring-and-actuator copper kit here; 180° access in tight spots
7PCS RLS Jaws, 1/4" to 1-1/8" RLS (copper) 1/4" to 1-1/8" 7 jaws 32KN standard Yes Only high-pressure HVAC/R set; the pick for refrigerant lines
VMP Jaws 3PCS, 1/2"–1" MegaPress (VMP) 1/2", 3/4", 1" 3 jaws 32KN standard Yes Smallest carbon-steel jaw set; common sizes without the full kit
VUS Compact Jaws 3PCS, 1/2"–1" ProPress (VUS) 1/2", 3/4", 1" 3 jaws 24KN compact Yes Only compact-class copper set in the five; for compact press tools

Shop VEVOR Mega Press Jaws Now


VEVOR sells a wide range of mega press jaws for professional installation and repair of pipes. These tools are precision, efficient in operation, and long-lasting, with durable press jaws, pro press jaws that work with the systems of rigid press jaws. Whether you are installing copper-lined plumbing systems or coded steel piping systems, VEVOR solutions will provide a solid, reliable connection.


FAQs


How do I choose the right MegaPress jaws for my plumbing project?


Match the jaw to three things: the fitting system (MegaPress VMP for carbon steel), your press tool class (32KN standard or 24KN compact), and the pipe sizes you press. For mixed sizes, a MegaPress pressing kit covers 1/2 inch to 2 inch in one case.


Are MegaPress and ProPress jaws the same?


No. MegaPress jaws (VMP profile) press carbon-steel fittings, while ProPress jaws (VUS profile) press copper fittings. The profiles are cut for different fitting shapes and materials, so a copper jaw will not correctly seal a steel fitting. Choose the jaw that matches your fitting system.


What press machines or tools do MegaPress jaws fit?


VEVOR MegaPress jaws are built for either 32KN standard-class or 24KN compact-class press tools, and each jaw states which class it fits. Confirm your press tool's force rating before buying, because a compact jaw and a standard jaw are not interchangeable across tool classes.


Will MegaPress jaws work on other brands of fittings?


MegaPress-profile jaws are designed to press carbon-steel fittings built to the MegaPress standard. Compatibility depends on the fitting matching that profile and size, not on the brand name. Verify the fitting's pressing profile and diameter before pressing to ensure a correct, leak-tight seal.


What is the difference between MegaPress compact jaws and standard MegaPress jaws?


The difference is the press tool they drive from. Compact MegaPress jaws suit 24KN compact tools for tight spaces, while standard jaws suit 32KN tools. Both press carbon-steel fittings; match the jaw to your tool's force class.


What sizes of pipe can MegaPress jaws and rings connect?


Across the range, jaws and rings cover roughly 1/4 inch through 2 inch depending on the system. Single jaws handle one size, kits span several, and press rings with an actuator reach the larger diameters. RLS HVAC/R jaws, for example, run 1/4 inch to 1-1/8 inch.


Are MegaPress jaws compatible with standard press tools from multiple brands?


VEVOR MegaPress jaws are made to work with press tools of the matching force class (32KN standard or 24KN compact) rather than a single brand. Compatibility hinges on the tool's class and jaw-mounting standard, so confirm your tool's rating before pairing it with a jaw.


Can MegaPress jaws be used for gas line installations?


MegaPress VMP jaws press carbon-steel fittings, the material used for many gas-rated runs, which is why carbon-steel pressing is their core use. Gas work is regulated, so confirm the specific fitting is approved for gas and follow local code and the fitting manufacturer's instructions before installation.


Tips & Inspiration