VEVOR Storage Shelves, 5-Tier Adjustable, 2000 lbs Capacity, Heavy Duty Garage Storage Shelving Unit, Metal Utility Rack Shelf, for Garage Warehouse Basement Kitchen, 36.34" W x 16.34" D x 71.38" H

SPCC Steel Frame and E1 MDF Boards for 2000 lbs Total Capacity

The SPCC carbon steel frame provides this metal utility shelving unit with strength, and the E1 MDF boards on each shelf add support. With that mix, the unit can hold up to 2000 pounds, and each shelf can hold up to 400 pounds. Instead of using thin sheet metal or particleboard on its own, this combination creates a rack that stays rigid when you store heavy tools or large home appliances.

The steel frame spreads the weight-bearing stress across the vertical supports. The MDF shelf boards make the surface flat and even, so it will not bow or dip when it is full. That is important when you need to stack storage bins, seasonal items, or tools that need a level base. This design ensures that every level is stable and reliable, even when several shelves are loaded close to their maximum weight simultaneously. The unit can be put in a garage, warehouse, or basement.

Adjustable Gourd-Shaped Slots for Custom Shelf Spacing

The frame of this unit has gourd-shaped holes at every shelf level, so you can move each tier up or down as your storage needs change. Tall items, like vacuums, bins, or small appliances, need more space than short items, like tools, boxes, or kitchen supplies. You can adjust the spacing between the shelves to make full use of the vertical space.

The rubber mallet that comes with the unit is all you need to adjust the shelves. You can change the layout whenever your storage needs change, like when you need to add taller items to the garage or rearrange the basement to make room for seasonal items. When you want a metal utility shelving unit to serve multiple rooms or purposes over time, this adaptability is very helpful because it does not lock you into a single configuration.

Metal Utility Shelving Unit That Splits Into Two Independent Racks

One great thing about this metal utility shelving unit is that it can be split into two shorter, separate units. This feature is helpful in places like basements, crawl spaces, or low-hanging storage rooms where there is not much roof clearance and a single tall rack would not fit. Splitting the rack in half does not change its strength or usefulness, because each half functions as a stable, whole shelving unit on its own.

You can also place the two halves side by side to create a wider workstation or double the storage space in areas with more open space, like a garage or warehouse. Because it can split and reassemble, this design means that a single purchase can fit many different rooms and needs, from those with limited space and low clearance to those with a wide-open floor plan. Few shelving racks have this much built-in setup flexibility.

Snap-On Assembly for Tool-Free, One-Person Setup

With a snap-on design, no screws or nuts are needed to assemble the frame. The parts fit together easily, and the rubber mallet that comes with it helps seat each joint firmly so the structure stays together when loaded. This feature eliminates the need to go back and forth to find the right tools or to fix loose connections that can develop over time with bolt-together shelving.

One person can put the whole thing together without needing someone else to hold parts steady because they snap together directly. A pair of gloves is included to make working with the steel frame more comfortable. It should only take one builder a short time to go from opening the box to having a fully assembled, load-ready shelving unit.

400 lbs Per-Shelf Load Rating for Heavy-Duty Storage

Individually rated at 400 pounds, each of the five shelves distributes the load evenly throughout the unit, not just at the base. This per-shelf capacity is important when you are carefully arranging by weight, such as placing heavier tools or equipment on lower shelves and lighter items, like bins or supplies, higher up.

The 400-pound weight limit applies whether you are storing power tools, canned goods, auto parts, or just extra stuff around the house. This shelving unit does not give you a single total capacity number that assumes completely even weight distribution. Instead, it gives you a reliable rating at every level. So, it works well in places like garages, workshops, and factories where shelves need to handle constant loading and unloading.

Compact 5-Tier Metal Utility Shelving Unit for Any Space

This metal utility shelving unit is 36.34 inches wide, 16.34 inches deep, and 71.38 inches tall, so it will fit nicely in garages, storage rooms, workshops, and factories without taking up too much floor space. The five-tier design maximizes vertical storage while keeping the overall size compact enough to fit in tight spaces, such as corners or smaller rooms.

The unit's size also makes it a good choice for kitchens that need more pantry-style storage, basements that store bulk household goods, or warehouses that need to organize stock across multiple areas. This rack can fit almost any layout thanks to its split-unit flexibility and adjustable shelf spacing. No matter where you put it, it will help you keep everyday items organized, easy to reach, and off the floor.