Labor Day

Deals

VEVOR Walk-in Green House, 54 x 81.1 x 77.2 in, Greenhouse with Shelves, High Strength PE Cover with Zipper Door and Steel Frame, Assembly in Minutes, Suitable for Planting and Storage

Walk In Greenhouse with Shelves Featuring 2 Levels and 14 Wire Shelves for Vertical Growing 

The VEVOR walk in greenhouse with shelves divides its interior across 2 levels containing 14 individual wire shelves, each measuring 26.2×9.4 in (66.6×23.8 cm) with a 20.5 in (52 cm) vertical spacing between tiers. For maximum plant capacity in a small footprint, this two-level vertical layout uses the full interior height of the 77.2-inch structure. It can hold seedling trays, potted herbs, flowering plants, and small vegetable containers on multiple growing layers at the same time.

Securing ties helps keep the wire shelves firmly in place during use. Each shelf can hold up to 33 pounds (15 kg). The wire shelf surface allows air to flow freely around pot bases, preventing moisture from building up on shelves and causing root rot. The 14-shelf configuration also gives plants a lot more places to grow than a similar floor-only greenhouse of the same size.

Q195 Powder-Coated Steel Frame with Triangular Top Support for Structural Stability 

The frame is made from Q195 powder-coated steel tubing and has a powder-coated finish to protect it from rust, wear, and UV damage in all four seasons of outdoor use. With the wind pushing on the PE cover, the weight of fully loaded shelves, and the dynamic loads from opening and closing the zipper door many times a day, Q195 steel provides the strength to maintain the frame's shape.

Upgrading the triangular top support structure at the frame's peak and adding cross-bracing to the roof section prevent lateral racking and keep the peak from bowing inward under heavy loads. This triangular reinforcement distributes forces on the roof more evenly than a simple rectangular frame design. This makes the structure more rigid overall, especially under uneven loading, such as wind blowing from one side or snow falling unevenly on a sloped roof.

140 g/m² Double-Sided PE Cover with UV6 Rating for Weather and Light Management 

The greenhouse cover is made of 140 g/m² double-sided coated polythene with a UV6 protection rating. It allows sunlight to reach plants while helping reduce UV exposure.

More durable than lighter, cheaper greenhouse covers, the 140 g/m² weight class offers better tear resistance at seams and corner stress points, where covers usually break during wind events.

On the outside, the double-sided coating makes the cover waterproof, and on the inside, it creates a smooth surface that resists moisture from condensation inside the greenhouse. The sloped peak-style roof shape keeps rainwater from pooling on the cover surface. This is a common way for flat-topped greenhouses to fail because the weight of water stretches and weakens the cover fabric at the lowest point. Users should be aware that this greenhouse is meant to be placed in a sheltered area and should be properly secured during storms.

Zipper Door and 2 Vent Windows for Controlled Airflow and Pest Exclusion 

For daily tasks like watering, pruning, harvesting, and shelf loading, the 32.28 by 72.83-inch (82 by 185 cm) zipper door allows full-height entry so an adult can stand straight without having to crouch. Furthermore, the full-height opening makes it easy to move bigger potted plants and tools in and out of the greenhouse without tipping it or taking it apart. This makes setup and seasonal changes simple.

There are two vent windows in the cover that let you control airflow beyond the door opening. When both the vents and the door are open at the same time, cross-ventilation can happen. Enough airflow helps control heat in covered greenhouses during warm weather. This prevents temperatures from rising too quickly, which can harm heat-sensitive plants. 

Walk In Greenhouse with Shelves Secured by Ground Stakes, Guy Ropes, and Extended Base 

There is a three-part grounding system that keeps this walk in greenhouse with shelves stable. At the base of the frame, there are eyelets for U-shaped ground stakes. This keeps the structure in place against the wind forces that can lift and shift the big PE cover side to side. Attaching guy ropes between the upper frame and ground anchor points outside the greenhouse area creates diagonal tension that prevents the frame from tipping over when the wind blows in one direction for an extended period.

When you place stones, flowerpots, bricks, or other heavy items along the base edge of the extended bottom cover, they create a weighted perimeter that helps keep the structure stable. This weighted edge keeps the wind from getting under the cover at ground level, where pressure-difference forces can enter and lift and move light greenhouse structures during gusts. When you put together stakes, ropes, and a weighted base, you get layered anchoring that works well for yard and patio installations in homes with normal wind exposure.

54×81.1×77.2 in Footprint with Quick Connect Frame for Backyard and Patio Installation 

This walk in greenhouse with shelves measures 54 × 81.1 × 77.2 in (137 × 206 × 196 cm), making it suitable for patios, backyards, and garden spaces while providing generous growing and storage space. It has useful growing and storage space inside. The rectangular footprint aligns the longer 81.1-inch dimension with the structure's width, creating a useful internal depth that provides enough interior space for planting, watering, and organizing plants comfortably. 

Compared to bolt-together frame designs, the quick-connect frame system significantly reduces assembly time. This is because parts click or slide into place without requiring multiple bolts and fasteners to be tightened. At 30.64 pounds (13.9 kg) in total, the kit is light enough for two people to carry to the installation site and assemble without specialized tools.