VEVOR Diamond Blades 16 inch, 3-Pack Concrete Saw Blade Set, 1 in Arbor, High-Hardness Diamond Segments, 65Mn Steel Core, Dry Wet Cutting, Clean Edges for Concrete, Masonry, Brick, Stone, Granite

High-Speed Performance in 16 Inch Diamond Blades up to 3600 RPM

These 16 inch diamond blades are designed for maximum efficiency, cutting at up to 3600 RPM. They offer a reliable solution for tough job sites and professional use. When working on huge concrete slabs or stacked masonry buildings, the blade maintains a steady rotating speed without sacrificing control or output quality.

High RPM capacity and a finely crafted blade profile mean you spend less time per cut and more time getting your project done. Smooth cutting performance is not simply about speed - it is about maintaining that speed under stress. These blades are designed to cut smoothly and consistently with minimal vibration, so every cut is stable, precise, and clean from start to finish.

65Mn Steel Core for Superior Blade Strength and Stability

Durability Begins at the Core. The steel core of each blade in this set is made from 65Mn, a high-manganese steel alloy that offers a good balance of tensile strength, flexibility, and resistance to deformation under stress. The core material keeps the blade straight during long cuts, minimizing warping and wobbling that can degrade cut quality and safety.

To increase the cutting edge's lifespan, high-hardness diamond segments are attached to the steel core. For consistent abrasion and extended operational life, the segment matrix contains consistently distributed diamond particles. These 16 inch diamond blades are an affordable option for contractors and tradespeople seeking dependable equipment for every task, as the steel core and diamond segments combine to create a blade that withstands numerous cycles of use.

High Hardness Diamond Segments for Extended Cutting Life

The 16 inch diamond blades are equipped with high-hardness diamond segments, with a segment height of 0.49 in / 12.5 mm, which provide a large amount of cutting material and wear down slowly for long-lasting performance. The segment thickness is 0.15 in / 3.7 mm, which is the optimal thickness for balancing durability and cutting performance across a wide range of hard materials.

The diamond segments are securely bonded to the steel core so that they do not separate even under strong cutting pressure. This robust bonding procedure keeps the segments in place through thousands of cuts, whether you are cutting granite, brick, stone, or reinforced concrete. The result is a blade that lasts many times longer than typical abrasive blades, maintaining its cutting edge and edge quality during its full usable life.

16 Inch Diamond Blades with Wet and Dry Cutting Versatility for Cleaner, Safer Operation

Another benefit of this set of concrete saw blades is that they are usable for wet and dry cutting. Dry cutting mode: The blade removes material quickly without a water supply. Ideal for fast cuts in open areas. Wet cutting mode uses water to reduce heat buildup and control airborne dust, providing cleaner and safer operation.

Without purchasing multiple sets of blades, operators can change settings for various job situations. For longer cutting times, wet cutting is especially advisable, as it helps dissipate heat that might otherwise cause the diamond segments to deteriorate too quickly. This dual-mode's adaptability finally results in increased worker safety and cut quality across a variety of task conditions, extended blade life, and less downtime.

Universal 1" Arbor for Multi-Tool Compatibility

The concrete cutting blades have a standard 1 in / 25.4 mm arbor diameter and are compatible with a range of power equipment, including angle grinders, circular saws, and wall chasers. The arbor diameter is 25.4 ± 0.1 mm and is designed to fit securely without wobble on most professional- and consumer-grade machines.

Also, the box includes copper bushings that expand the tool's compatibility with different spindle sizes and save you the trouble of purchasing adapters individually. The universal-fit design of these blades allows them to move easily between machines and from one job to another on-site, reducing setup time and boosting operational flexibility. Installation is fast and easy, whether you are a contractor with many machines or a DIY user with one saw.

3-Blade Value Pack with Copper Bushings for Fewer Replacements

This set includes three blades, making it an instant value for money for both professionals and serious DIY users. Having several blades on hand is useful so you don’t have to wait for one to wear out or become damaged in the middle of a project. When one blade reaches the end of its service life, work can continue without a break or an emergency trip to the supplier.

Each set comes with copper bushings and blades to ensure tool compatibility and proper installation. All three blades use a 65Mn steel core and high-hardness diamond segments to ensure consistent performance from the first cut to the last. The pack is heavy enough for serious use, with a full set weighing 7.8 kg and individual blades weighing 2.6 kg each, yet manageable for transit and storage at active task sites.