Deals

VEVOR Motorcycle Lift, 1100 lbs Motorcycle Scissor Lift Jack with Wide Deck & Lock Pin, 3.74"-13.38" Center Hoist Crank Stand, Steel Scissor Jack for Street Bikes, Cruiser Bikes, Touring, Blue/Black

1100 lbs Motorcycle Lift with Reinforced Steel Scissor Frame for Heavy Load Support 

The VEVOR 1100 lbs motorcycle lift features a heavy-duty steel scissor frame that helps distribute the load evenly. The reinforced scissor shape resists lateral flex under normal operating loads. This helps keep the platform level and stable across the full height range, so it does not tilt or rack when the weight changes during placement.

With a weight limit of 1110 pounds (499 kg), this lift can hold most street bikes, cruisers, and touring bikes without exceeding its rated capacity. The scissor design focuses the lifting force along a central axis. 

Solid Lead Screw Mechanism for Smooth and Reliable Height Adjustment 

This 1100 lbs motorcycle lift does not use a hydraulic cylinder or gas system to lift the platform. Instead, it has a solid lead screw that does the job. This makes it easy to raise and hold the platform at any point in the lift range. Lead screw drives convert rotational input from the crank handle directly into linear vertical movement without the pressure seals, fluid lines, or valves that hydraulic alternatives rely on, reducing the number of components that can degrade or fail over time.

The screw rod is designed so that the threads resist wear during repeated use. This way, it will keep lifting weights consistently for a long time. Crank input is applied with the 22 mm hex wrench included with the unit, providing the operator with smooth, controlled raising speed without the sudden pressure releases associated with foot-pedal hydraulic lifts. 

3.74–13.38 in Lift Range and 22 mm Hex Wrench for Flexible Working Heights 

You can rotate the crank to move the platform continuously between a low position of 3.74 inches (95 mm) and a high position of 13.38 inches (340 mm). This gives you a 9.64-inch range of working heights. The low collapsed height allows the lift to slide beneath motorcycles with lower ground clearance.

The 13.38-inch maximum height lifts the motorbike high enough off the ground to remove the wheels, check the brakes, drain the oil, and grease the chain without extra stands or support blocks. Because the lift range is continuously variable, the operator is not limited to fixed height increments. Instead, they can stop at any intermediate height that makes the best working position for the task at hand.

1100 lbs Motorcycle Lift with Locking Pin for Secure Height Retention 

It is easy to keep this 1100 lbs motorcycle lift in place once it is at the right height. It has a locking pin that fits into several pre-drilled holes along the scissor frame at different heights. The pin physically prevents the scissor mechanism from collapsing under load. This serves as a mechanical safety backup, separate from the lead screw's thread friction.

When you work, this dual retention system lead screw thread engagement and a locking pin—simultaneously keeping the platform in place through two separate processes. The locking pin provides secondary mechanical support after the lift reaches the desired height. Besides that, it provides direct physical protection against a sudden platform drop if crank resistance is accidentally overcome.

14.56×9.05 in Wide Non-Slip Platform for Stable Engine Support 

The platform deck measures 14.56×9.05 in (370×230 mm) and has a contact surface wide enough to support the frame or engine case of most motorcycles without concentrating load on a small area. The wide deck geometry spreads the bike's weight over a bigger area. This lowers the point pressure on the frame tubes and lowers the chance of damaging painted or powder-coated engine casings when they come into contact with the deck.

The deck surface has a textured, non-slip treatment that improves contact between the platform and the motorcycle, preventing the motorcycle from sliding side to side when the lift is raised and lowered. In this case, a smooth platform surface would allow the bike to shift during lifting as the platform rises, which is undesirable when lifting bikes with rounded or angled contact geometry. Along with the wide deck area, the non-slip surface keeps the motorcycle in place throughout the entire lift cycle.

Coated Steel Construction and Foldable Design for Compact Garage Storage 

A long-lasting coating covers the whole scissor frame and platform assembly. This coating prevents surface rust, oil contamination, and general wear and tear on workplace floors. The coating protects the structural steel beneath from moisture in garages and workshops, where humidity is high and fluid spills are common. This makes the frame last longer without needing any extra protection after purchase.

The lift folds down to 16.8 × 9.6 inches when not in use. This makes it easy to store under a workbench, against a wall, or on top of other garage tools. The unit weighs only 29.3 pounds (13.3 kg), so one person can move or carry it from storage to the work area without help. This makes it useful in both dedicated workshops and shared garages.

Compatible with Street Bikes, Cruisers, and Adventure Touring Motorcycles 

The lift's wide platform, low profile when folded, and 1100 lb weight capacity make it a good fit for many types of motorcycles. The wide deck that runs across the frame is good for street bikes and naked bikes with visible frame rails. 

This lift is also well-suited for ATV maintenance jobs that require a stable, low-profile scissor platform to get under the vehicle, thanks to its size and weight capacity. The lift folds flat and can be used immediately without assembly. This makes it useful for garages with more than one type of bike.