Deals

VEVOR RV Water Softener, 12,000 Grain, Portable Water Softener System with NPT 3/4" Fittings, Food-Grade Resin, Quick Connect, Convenient for RVs, Trailers, Boats, Mobile Car Washing, Pressure Washing

The thread on the top of the FRP pressure vessel tank is a 2.5"-8 NPSM (2.5-inch Straight Pipe) female thread, which is the industry standard for composite fiberglass resin tanks used in water softeners and filtration systems.

The ion-exchange resin can be regenerated repeatedly throughout its 3- to 5-year overall lifespan (typically every 1 to 2 months depending on water hardness and usage). Rather than a fixed maximum number of regeneration cycles, the resin continuously regenerates using standard salt whenever softening efficiency decreases until the beads naturally degrade after several years of use. If this answer doesn't resolve the current issue, please reach out to us again for assistance.

Tighten the cap back on, reconnect only your fresh water hose to the Inlet port, and turn on the water supply very slowly so a gentle, pencil-thin stream trickles out the outlet for 15 to 20 minutes—this allows the brine to draw across the resin beads and strip away accumulated hard minerals. Finally, turn the water to full pressure for 2 to 3 minutes to perform a fast rinse until the outgoing water no longer tastes salty, then turn off the water, reconnect your outlet hose to the RV.

To regenerate your VEVOR 12,000 Grain Portable RV Water Softener, start by turning off the water supply, releasing line pressure, and disconnecting both hoses. Open the top cap, pour out a small amount of standing water, and add about 2 lbs of plain, non-iodized table salt (or water softener salt) into the tank using a funnel.

This product has a diameter of 7.09 in/180mm and a height of 15.55in/395mm.

No, you cannot operate or mount this water softener on its side.