VEVOR Dual Lens Endoscope with Light, 5" HD IPS Screen Industrial Borescope Camera, 0.22-inch Slim Lens, 8X Zoom, IP67 Waterproof Inspection Snake Camera for Automotive, Plumbing (16.4FT Rigid Cable)

Dual Lens Endoscope Camera with Light Featuring Front and Side Cameras for Two-Angle Inspection

The VEVOR dual lens endoscope camera with light features a dual-camera system that combines a forward-facing lens and a side-facing lens into a single, thin probe. This kind of double-angle arrangement enables users to look forward and to the side without having to pull and reinsert the probe to adjust the perspective. Real-time switching between front and side views enables quicker, more complete inspections with considerably less disruption to neighboring equipment or structures.

Single-lens inspection cameras require operators to repeatedly move around just to evaluate surfaces that are not directly in front of the probe. The dual-lens design solves this challenge by offering two viewpoints from a single insertion point. Whether it’s inspecting engine cylinder walls, the interior of a plumbing bend, or monitoring HVAC ductwork for obstructions, the front and side cameras work together to provide a far more complete visual view, minimizing the possibility of missing an issue that would only be evident from a lateral angle.

0.24" / 5.5mm Slim IP67 Waterproof Probe with 16.4FT Rigid Cable for Deep Narrow Access

This dual lens endoscope camera with light has a probe diameter of just 0.24 inches (5.5mm), so it can access locations that standard borescope probes can't reach. This small profile is very useful for automotive and mechanical inspection work, as engine parts, valve seats, and tubes in fuel systems often have very limited access routes. It is slim enough for the probe to fit into narrow internal places without having to take apart surrounding pieces.

The probe is rated IP67 waterproof and oilproof, so you can submerge it in water up to 1 meter deep for up to 30 minutes. Therefore, it is dependable for wet plumbing inspections, drain line inspections, and oil-exposed mechanical situations. The probe is supported by a solid cable 16.4 feet (5 meters) long, providing a uniform push force along its entire length. The strong construction stops coiling and buckling, so the probe moves forward reliably and stays precisely where the operator wants it during the inspection.

5" IPS Screen at 854×480 Resolution with 1280×720 HD Lens and 8X Zoom for Precise Diagnosis

Operators actively inspecting have a big, clear viewing area thanks to the built-in 5-inch IPS display. Footage is shown on a screen with a resolution of 854×480, colors are accurate, and contrast is good. The 1280×720 HD main lens captures fine surface detail that lower-resolution systems would utterly miss. IPS panel technology ensures consistent image quality across a wide range of viewing angles, a critical feature when the screen needs to be viewed from the side or at an angle for hands-on fieldwork.

Five levels of zoom capability are provided – 1x, 2x, 4x, 6x, and 8x – enabling the operator to gradually zoom in on any region of interest without moving the probe. At 8x magnification, corrosion, cracks, weld variations, debris build-up, and other surface defects are easily assessed and readily apparent. The combination of a large HD display and multi-level zoom makes this dual lens endoscopic camera with light a precise diagnostic tool for automotive, plumbing, HVAC, and industrial inspection duties.

6+1 LED Lights with 3-Level Adjustable Brightness for Clear Visibility in Dark Wet Environments

The probe features a 6+1 LED lighting system, with six LEDs encircling the front lens and a separate dedicated LED for the side camera. This design enables direct illumination of both lenses, ensuring the footage is well-lit from all active viewing angles. Whether in dark pipes, enclosed engine cavities, or unlit duct interiors, constant lens-specific lighting is the difference between clear, actionable footage and underexposed photographs that obscure the very problems sought.

The operator can also set the output between 3 different brightness levels to match each examination scenario. Its low brightness avoids glare in small, restricted spaces where the full strength of the LED would wash out surface detail. In contrast, the high brightness provides excellent illumination for larger cavities or for areas with dark interior surfaces. This adaptable design provides consistent image quality in a variety of situations. The probe is manufactured to be waterproof and oil-resistant, so the LED array can continue to operate reliably in wet and dirty conditions without degradation.

3000mAh Battery for 3–4 Hours of Continuous Dual Lens Endoscope Camera with Light Operation

The included 3000mAh rechargeable battery provides 3 to 4 hours of continuous use on a single charge, offering enough runtime to complete most professional inspection projects and comprehensive DIY sessions without pausing to recharge. The tool is rechargeable, so you don't have to keep buying disposable batteries, making it a more practical choice for repeated daily use across a variety of inspection chores or job sites.

When working in areas without power access, long battery life is particularly important: outdoor pipelines, remote mechanical equipment, crawl spaces, and underground infrastructure are all situations where a mid-inspection shutdown would be costly and disruptive. This dual lens endoscope camera with light weighs only 0.8 lbs. That’s light enough to hold and operate comfortably throughout a charging cycle. The low cost, coupled with minimal weight, makes it truly practical for both professional technicians and home users performing extensive inspection work.

32GB SD Card with Photo Capture, Video Recording, and 180° Screen Rotation for Easy Data Review

A 32GB SD card provides storage for all photographs and videos during an inspection session. Users can document every important finding as it happens by recording video of issue areas or still photographs of specific defects and store everything directly on the card for review, client reporting, or maintenance records post-work. Storing it onboard eliminates the need for external devices and makes the whole documentation process self-contained in the machine.

The 180° screen rotation mechanism allows the display to be set to the correct position for the operating position of the probe, whether overhead, pointing down, or at an angle, thus reducing pressure on the neck and eyes during long sessions. The device supports several languages, making it available to a large audience. Altogether, these characteristics make this inspection camera a comprehensive solution for ready-to-use documentation and precise visual examination.