Mesa de fresado inclinable VEVOR de 10 x 7 pulgadas, fresadora con ángulo de inclinación ajustable de 0 a 90°, placa de ángulo giratorio con 3 ranuras en T y manivela ajustable, fresadora inclinable de alta resistencia para rectificado.

The product has a T-slot and is fixed with a T-nut or T-screw.

The small part is the top of the slot which is 10 mm and the bottom of the slot is 12 mm so the t nut has to fit through the slot 10 mm is a .393 thousand and 12 mm is .472 thousand

The narrow part of the slot measures about 12mm, so they're too small for the t-slot clamp sets that are used for most manual milling machines, which use 1/2-13 thread. I also have a set of t-slot clamps that use 3/8-16 thread (which I bought for a rotary table), and those work great on this table. Since 3/8 is similar to 10 millimeters, maybe that's where the 10mm measurement came from. The width of the narrow part of the T-nuts from my 3/8-16 set measure about .42 across.

The product description does not specify the size of the T-slots, but it does mention that it has 3 T-slots. Without more detailed information, I cannot definitely confirm if the T-slots are compatible with standard bolts.

The product description doesn't mention anything about the tilting motion being smooth. However, it does state that the tilting table has a crank handle that allows for angle adjustment from 0-40 degrees in both sides and features a clear dial for precise measurement.

The product information does not mention anything about mounting hardware. It only lists a cleaning brush and hand wrench as included components.