Customer Reviews for VEVOR Truck Bed Storage Box, Lockable Lid, Waterproof ABS Wheel Well Tool Box 6.6 Gal/20 L with Password Padlock, Compatible with Dodge Ram 1500 2019-2021, Passenger Side, Black

Worked great Had to cut the Berliner a little but all is well sticks out a little farther than I would like need a more adjustable bracket

Fits in Nissan Frontier 2022-2023 great product. No modificación needed. Fast shipping, good communication.

Perfect fit in my Toyota, had to remove the cargo tie down but it was an easy job. Holds plenty of tools.

The package received is consistent with the function described on the website. I was worried that it would not be suitable. I really like the professionalism of this store.

After receiving the product and using it for a period of time, there was a problem, and it was resolved immediately after contacting customer service.

Fits and works great. Priced right compared to other brands. I like how it latches and easy turnaround. I’m thinking of getting one for the other side.

I like to keep some tools in my truck and this does a good job of keeping them safe, out of the weather and stops them from sliding around. This did all of that effectively. It wasn't difficult to install. It's lighter than I expected. If you use the bed of your truck for heavy duty uses then you should probably used a heavy duty box. When I have metal, wood or cement in my truck I worry that this box would get crushed but so far it's done well.

So yes, go buy 3 m8 2 inch hex head bolts, thick waters and lock nuts. Take out the taillight, bolt in the hinge bracket but keep it a little loose. Next, test fit the latch bracket. If it's too wide put it in a crack in the sidewalk and step on it. Do this till its the right size. Flip the nut n bolt on the latch catch so the Phillips Is on the ouside. Bolt the latch bracket in place. Flip the tie down point by the twilight tround. Attach the box, test fit the latch and adjust by moving the latch up or down and or adjusting the hinge bracket by putting the box parallel to the bed and move the end up or down till it latches. Tighten up the hinge plate. Tighten up the latch by putting a open ended wrench behind the bracket and turn using the Phillips. Load it up and go. Took me 30 minutes and I was done4 stars cuz the plastic is a little brittle.

I received the storage boxes as promised. They installed reasonably easily with a couple of required modification and one item I changed due to my own requirements. 1. The brackets which hold the locking mechanism are supposed to bolt directly to the inside of the 2021 F150 bed. The holes in both the brackets were off by 3/4 of an inch. In order to install the bracket I had to put it into a vise and squeeze it so the 4 holes would line up otherwise it could not have been mounted correctly. 2. One of the locking mechanisms itself was slightly bent and again had to be put in a vise and straightened. The supplied screws which are used tp attach the hinge mechanism to the truck body were not something I would ever use. They were cheap and would eventually rust. I replaced them with stainless steel nuts, bolts and washers. The replacement of the hinge fasteners was my choice. but, for me, was the right thing to do.

I received the storage boxes as promised. They installed reasonably easily with a couple of required modification and one item I changed due to my own requirements. 1. The brackets which hold the locking mechanism are supposed to bolt directly to the inside of the 2021 F150 bed. The holes in both the brackets were off by 3/4 of an inch. In order to install the bracket I had to put it into a vise and squeeze it so the 4 holes would line up otherwise it could not have been mounted correctly. 2. One of the locking mechanisms itself was slightly bent and again had to be put in a vise and straightened. The supplied screws which are used tp attach the hinge mechanism to the truck body were not something I would ever use. They were cheap and would eventually rust. I replaced them with stainless steel nuts, bolts and washers. The replacement of the hinge fasteners was my choice. but, for me, was the right thing to do.