Customer Reviews for VEVOR Grease Gun Coupler 2 PCS, 10000 PSI High Pressure, 3-Jaw Locking Quick Release Grease Gun Tip with Hose/Cleaner/Extension Needle/Leak-Proof Cap, Compatible with All Grease Guns 1/8" NPT Fittings

Vevor makes good quality products and this one is no exception. I'm using this around the compound on various pieces of equipment and implements. It came with the small plastic cleaner that makes it easy to get the dirt and gunk away from the fitting before you use the couplers. The longer hose is handy for those hard to reach fittings. It locks on tightly similar to that name brand of lock on grease fittings.

Haven't been able to try the extra fittings, but the main zerk clamp is awesome. It grabs the fitting well and lets you pump it up with grease with one hand, even when the fitting is a little clogged. Placed one end on a cheap harbor freight grease gun and it worked out well.

I replaced the original coupler on my grease gun with this one. The lock connector works as expected. The cap to cover the end is a great additional feature. It comes with a card with basic instructions for use. This is a handy grease gun accessory kit.

I have used a traditional grease gun for several years now. Have I had grease everywhere after using the gun? yes I have. It just seemed like the way it was supposed to be. A friend suggested trying this type of fitting and said it was much less waste and mess. After replacing the old coupler and priming this one, I have to admit I am sold on these newer style locking connectors. They go on solidly and there is very little to no mess when taking them off. Lubing my trailers was an all afternoon task, and now it is much faster with higher confidence that the grease went where it is needed rather than some of it on the ground.

i have several pieces of farm equipment that require greasing and this a life saver i replaced my standard tip with this and have never looked back there are 7 hard to reach grease points on my back hoe and this clips on to them and allows me to properly grease them without the tip falling off, if i could give this 6 stars i would its a life saver and being a 2 pack i have a spare in case this one wears out. If you are maintaining any kind of equipment with hard to reach grease fittings do your self a favor and buy this YOU WILL THANK ME

I have no complaints. I was looking to replace our existing parts and pieces, and this got the job done. No issues thus far and it has performed exactly as expected. I would definitely consider ordering this again.

I got these to use with my tractor. There are a lot of grease fittings and having something with a positive lock is helpful when you can't see how well you've got the gun hooked. Overall they've worked really well. It took some getting used to, to figure out how to squeeze them right but now it's second nature. Great accessory for someone using a grease gun a lot.

Easy installation and as an extra measure I added some Teflon tape on all 4 NPT fittings. One locking coupler was added to my grease gun with the blue marine grease and the other locking coupler was installed on my grease gun with general purpose automotive grease. Now both my grease guns are truly ‘a one handed operation’. You’ll want to install the hoses with the springs on the end closest to the grease gun for maximum hose protection from kinking

This grease gun coupler is awesome, If you have ever used a grease gun with a hose, you know what it is like to try to reach up to the grease fitting that you can almost not see, push the hose on to the fitting and hold it tight to keep it on, then with the other hand, hold the gun and at the same time pump the handle. With this coupler, you can actually lock the hose end onto the grease fitting. Once it is on the fitting, it will not come off until you press the on/off leaver. This latching coupler is awesome and takes about 3 minutes to install with two wrenches. I would definitely recommend.

I haven't actually used these yet as I don't have anything to grease at the moment but they seem well made and heavy duty. The lever mechanism works well. I have little doubt that it will work well when I next need to grease up something.