Customer Reviews for VEVOR Bucket Tooth Bar, 49'' Bolt on Tooth Bar, with 6 Weld-on Shanks and 7'' Long Replaceable Tooth, Heavy Duty Cast Iron Design, Clamp-On for Tractor Loader Bucket - No Drilling Required

I cut about 30 trees and used these for clean up they worked great.

Works good as a medium duty brush rake on a sub compact tractor.

If these ever come back in stock they are very heavy duty. Cast iron and solid steel construction. Teeth are replaceable, but I doubt they would ever wear out. I ordered 64" as it was all that was available, but I cut it down for my 48" bucket and it was a perfect fit (I eliminated the last 2 teeth so I have 2 extras). Cutting it was easy enough with an air powered cutting wheel. I hit the end with a rattle can to prevent rusting). Install was easy enough. Packing was horrible with just a couple thin pieces of plywood on the top and bottom but nothing on the sides. Single wall cardboard box to try to contain the 90 plus pounds of iron. Teeth were only shrink wrapped to the bar and scratched the heck out of it. Hardware was tossed in loose and some of it was missing. Thank goodness I have enough for my shorter bar, but be aware that you may have to acquire additional hardware (I am contacting the company to see if they will send additional missing pins and bolts). I will update if they take care of this issue.UPDATE: Contacted the company and as expected they don't stock hardware in the US warehouse. They offered a small refund or to wait 2 to 6 weeks. I took the refund and purchased some extra nuts and bolts for a couple bucks. Customer service was great and very quick to communicate and took care of the issue fast. Very pleased with the entire process. Changed to 5 stars despite the few issues.

I was quite frankly surprised at how well it was built. The sellers were very good to work with and the package was damaged in shipment. Not the sellers fault. They immediately sent another item out and it arrived somewhat roughed up but usable. I installed it on my John Deere 72” bucket and was very impressed with how well it works. Would recommend if they can find a shipper not so rough on their products. It is very heavy and I’m sure that was the main problem .

Once mounted on my bucket, my tractor was like a different machine. The bar and teeth held up well after weeks of digging. I would suggest having a long punch and heavy hammer to attach the teeth to the bar. I also compressed the C clip on the pin with a vise grip to get it started.

I use this as lifting forks to move things around the house. They also work well for sifting and cleaning up debris from trees. Serves the purpose well, and didn’t cost a fortune. The clamps can be difficult to tighten properly, but a little persuasion with a 20lb hammer takes care of it.

2 weeks after installing these teeth on my bucket I got my bobcat stuck without those teeth I wouldn't have been able to push myself back out of the muck. They could use some holes in the middle I ended up using a blowtorch and put extra holes in the middle. If you're not handy with the wrench this installation will kick your ass but it's a good price beats buying another bucket.

Ordered the tooth bar for my l2501, with a 66" bucket the tooth bar was approx 1" too long. Cut a half inch out of either side of the center tooth and welded it back together. The tooth bar then fit great and it makes a huge difference in digging and the teeth are a little long but it works great for carrying logs.

Well built but would not fit over my 48" JD bucket. Had to modify.

Tough game changing addition to my loader bucket. This is money well spent. Digs more effectively, uproots vegetation quickly and decreases the number of passes required to clear debris!