Customer Reviews for VEVOR Bucket Tooth Bar, 49'' Bolt on Tooth Bar, with 6 Weld-on Shanks and 7'' Long Replaceable Tooth, Heavy Duty Cast Iron Design, Clamp-On for Tractor Loader Bucket - No Drilling Required

I installed this tooth bar several months ago & its been a "game changer" for digging roots & picking up logs. Very happy w/this purchase. I did need to custom fit the tooth bar IOT fit the front blade of my bucket. My bucket has an extra piece of steel wear strapping running across the front of the bucket. The strapping makes the lip of the bucket thicker than the birds mouth on the teeth. In order to get the teeth to fit over the lip I had to use a 4" grinder to grind off about 1/4 inch of steel on the underside of the strapping on the bucket in order for each tooth to slide on. Took about 30 minutes to do the grinding & then the tooth bar slid right on. Drilled a couple of holes in each side of the bucket & tightened up the bolts. Tooth bar is mounted on my 2004 New Holland TC-30 w/a OEM NH 7308 loader.

Item is very heavy made steel and seems to work well,,only drawback is weird pins that are included to attach teeth to bar..they are very hard to insert without drilling out hole a little and then a heavy hammer has to be used along with lubrication..overall a very sturdy long lasting item

I was very surprised about the quality, it was very well made! Thank you VEVOR. It's hard to find quality and price!

Worked great!

If these ever come back in stock they are very heavy duty. Cast iron and solid steel construction. Teeth are replaceable, but I doubt they would ever wear out. I ordered 64" as it was all that was available, but I cut it down for my 48" bucket and it was a perfect fit (I eliminated the last 2 teeth so I have 2 extras). Cutting it was easy enough with an air powered cutting wheel. I hit the end with a rattle can to prevent rusting). Install was easy enough. Packing was horrible with just a couple thin pieces of plywood on the top and bottom but nothing on the sides. Single wall cardboard box to try to contain the 90 plus pounds of iron. Teeth were only shrink wrapped to the bar and scratched the heck out of it. Hardware was tossed in loose and some of it was missing. Thank goodness I have enough for my shorter bar, but be aware that you may have to acquire additional hardware (I am contacting the company to see if they will send additional missing pins and bolts). I will update if they take care of this issue.UPDATE: Contacted the company and as expected they don't stock hardware in the US warehouse. They offered a small refund or to wait 2 to 6 weeks. I took the refund and purchased some extra nuts and bolts for a couple bucks. Customer service was great and very quick to communicate and took care of the issue fast. Very pleased with the entire process. Changed to 5 stars despite the few issues.

I ordered a 72" tooth Bar, overall quality is good. Not install yet. The teeth number is 7 teeth rather than 8. should notice.

Works great. Good price vevor is good shopping place for items at a low cost and for fast shipping. I have ordered several items from vevor and am satisfied with my purchases.

A little narrow for my larger tractor bucket but it worked great anyway, and allowed a ton of brush clearing I'd had trouble with before.Highly recommend this style accessory if you have a sometimes need for brush clearing or tend to rake piles of things in the bucket.Finally bent a tine, but it was my fault for hooking something badly trying to move it. Honestly surprised it took this long to do it, the usual abuse it held up fine.

Works great

Works great and is really tough. We did have to modify it with drilling additional holes to fit our case skid steer even though the measurements were correct.