Customer Reviews for VEVOR 1/2HP Furnace Blower Motor, 208/230V 2.7Amps, 1075RPM 5 Speeds, CW/CCW Rotation, 48 Frame 3.4" Shaft Length, 7.5μF/450V Capacitor + 11" Hold Hoop

Used this to replace a useless, problematic X13 motor that would just sit there and rock sometimes until it finally bit the dust after only a few years. This one starts instantly and has performed great. All I had to do was add a relay and I used the same start/stop circuit board that came with the AC unit.

Great motor put many of these in Mobile home units with no problems. Bought some extras to keep on hand. The Price of these motors is awesome.

This motor works well, and can save a lot of money especially compared to a technician recommending a new furnace for $5000 or more. My original blower motor was installed incorrectly at the factory. Apparently, the mounting holes were not placed correctly so the factory installer removed a sleeve from one of the three isolation mounts to thread the screw into a misaligned hole. Also, the holes were not parallel to each other, making the new mounting brackets not fit. I bent the new mounting brackets and used two of them and one old one. The impeller is not centered in the housing, but rotates smoothly. There is no rumbling with operation, and the fan and motor are at least as quiet as the old one, but probably less noisy. The capacitor is round and would not fit where the old one was, so I mounted it on the sheet metal of the furnace instead of on the fan housing. Also, I had to use heat-shrink style crimped connectors for the wiring. The product is great, and I am pleased Amazon carries it. But if you expect a 30 minute installation, your experience may not match your expectations. The directions are poorly written English, probably simply machine translated from Chinese, and I think the coil resistance values are nonsense. I studied wiring diagrams before I started, twisted an allen wrench getting my old set screw loose, used a hammer and punch to remove the old motor shaft from the impeller, and drilled holes in my cabinet to mount the capacitor. The reward was perfect operation when I applied power to the furnace at job completion.

Unbelievable price and shipping was fast. Motor worked like a charm. I will be ordering more today and I will save this part number for future purchases.

This saved us from having to get a $550 motor. It runs amazing and it’s not much louder than the original

Works perfectly!! Saved me thousands on replacing the entire heater!!

So easy to change and still doing great so far. Big savings. Thank you

work great everthing arrived packaged as advertised

The old motor and squirrel cage in my Coleman central air system were getting really noisy. This was the best deal I could find on a motor and it looked like it would work so I gave it a shot. I used the mount it came with as my existing mount was worn out from the vibration. The retrofit was fairly easy and this product is definitely worth the money.

It would've been about 800 bucks to replace the ECM motor in my air handler so just put one of these and the delay off relay for it in there instead and it works great!