Customer Reviews for VEVOR Adjustable Steering Wheel Stand Frame Stainless Steel Racing Steering Wheel Stand fit for Logitech G27 G25 G29 and G920 Wheels Racing Simulator Stand Racing Wheel Gaming Stand

Works well and holds wheel sturdily. wheel angle as well as height and angle of the supports are adjustable, pedals can be moved forwards and backwards as well as have angle adjusted as well.No issues at all with a 2.2 Nm force feedback wheel (logitec G920/G29), however if you're using a direct drive with 8+ Nm (or enough force to lift the whole wheel + 5 lbs) you may see a bit of wiggling due to the issue below.However the mechanism that allows it to change angle for wheel supports or laying flat/stowage isn't the best. It requires fully unscrewing it to adjust and has enough give so the arms can wiggle forwards by an inch. it feels like the middle ground between a pin and a bolt with proper grip.

Excellent, but a little bit unstable when using strongly.

Very sturdy everything seems to work good. Instructions were lacking, in fact they had some pieces backwards in images. Also was missing one bolt that was needed for shifter mounting. Would have been 5 stars if not for missing hardware.

So, this is probably the cheapest wheel stand on Amazon. I didn't expect perfect, and didn't pay for perfect. It works. With a couple of minor changes, it goes from acceptable to pretty good. What it has going for it is obviously the price and compatibility with most consumer sim gear. It's pretty easy to assemble. What's not so great about it is the included hardware. It's nearly impossible to tighten this down with the included tools. The hand tighten bolts aren't long enough to properly pass through the welded bolts on the vertical arms. The screws are made from fairly soft metal that is easy to strip with hand tools. The most glaring issue this has is the shifter pad. The two issues I had with it is that it's positioned way too low where most people will hit their knee/leg on one of the two or three (depending on how you slanted it) corners closest to the rail. Secondly, it's very flimsy. It completely lacks support on the outer side making it very flexible and it bends easily. I ended up removing mine entirely and made a new mount for the shifter out of a bar of aluminum stock; much more rigid and better positioned. Additionally, when your equipment is mounted to it, the unit becomes very "front heavy" it doesn't take much to tip this over and this could be improved by moving the feet closer to the front of the unit instead of closer to the middle where they are from the factory.All in all, it's not bad, but a few minor changes could make this a really good unit.

I’ve been using stand as a drift sim setup for about two months and never had a problem. 3 weeks after getting an e-brake I started braking the welds on the shifter stand. It’s not a bad stand but if you plan on using and E-brake then maybe find a better way to set it up or a different stand.

Para montarlo mejor buscar un vídeo en Youtube ya que con las instrucciones es casi misión imposible. Con el vídeo que encontré se monta de manera fácil y rápida. En cuanto a la adaptación al volante es muy buena y es fácil de plegar y guardar.

Super matériel au top

This is a great wheel stand for a great price. if i’m being completely honest, the people complaining about lack of instructions/unclear instructions are living proof that some of humanity exists solely off of luck. the instructions are so easy to read! i had this stand built in 20 minutes and configured to my desired height, wheel, shifters, and pedals attached in another 10 minutes. Please do yourself a favor and buy this wheel stand. they even included hardware to mount my logitech G923 Wheel, Logitech Shifter, and pedal set to the stand!

I think it's a good fit for an apartment. It folds for storage, and doesn't weigh some crazy weight, which allows for easy moving around if you decide not to fold it down (really great for apartment sized living). It's sturdy, the platform for the wheel has the ability to be adjusted. Almost like a real steering wheel would (up or remain as is). I've been using it for a week or so, and have no issues with it. The assembly directions aren't great with the small print and color font that clashes with the background of the one page directions.

For the price it’s worth it, I can honestly see my son was very happy with the finished product. Personal for me it was a bit more challenging to go over the Assembly instructions and it’s not so much because of the illustration it’s because the font size was really small her to get around then I took a picture of each step and I was able to increase the image on my cell phone. All in all it’s a great value against its competitors my take on it if you have a little bit a time and patience for assembling things definitely buy it you will enjoy it.