Customer Reviews for VEVOR 10x2inch Belt Grinder Rubber Wheel Serrated Rubber Contact Wheel 6206 Bearing Belt Grinder Wheel for 2x72inch Knife Making Grinder

Very nice wheel with one issue I resolved. I wrote a detailed review about a week ago and was told it couldn’t be posted. I’m not sure why but I’m going to try again. I think it’s very helpful what I figured out so I’ll try to stay on point. Many people have had issues finding an easy solution to the large 30mm ID of the baring. I found a brass bushing on Amazon that is 1-3/16” OD and 3/4” ID. This works perfectly other than sanding down the OD of the bushing a little. I’ll leave it at that even though last time I posted a picture of the parts to make it easier and more helpful information. Sorry.

The bearings on this wheel require a 30M diameter bolt. I used a 100mm long bolt from Fastenal, along with two nuts, and some welding and fabrication work on my part to get this wheel mounted. I was able to mount the wheel to a piece of 1/4" plate that was welded to a piece of 1 1/2" square steel tubing that fit in my grinder. I put the nuts on either side of the 1/4" plate and in that way I used one of the nuts for a spacer which moved the wheel in line with the other wheels on the grinder. Fastenal has these nuts and bolts available, but they are pricey. I bought two wheels, and two nut/bolt set ups for the same price as the grinder company wanted for one wheel with a smaller axel bolt and no 1 1/2" square steel arm to mount it to. I spent $250 for two wheels and all the hardware to get them mounted. The grinder company wanted $275 for just the wheel without any hardware to mount it to the grinder with. I wish I could find the bolts at a cheaper price because I would definitely buy more wheels if I could. Both of wheels I bought on Amazon are working great at this time.

Exactly what I needed. This contact wheel works well and is very smooth running

Works great just be prepared to deal with the large ID on the bearings

Bryan KingThis was the best deal I got for my grinder yet.It has improved my knife making.I also can do a very nice hollow grind.

Heavy duty..well built. Could be nicer with a smaller diameter center bearing/ axle, 1/2" or so.

My husband bought this for a grinder he is building. He is very excited for it to work

Used for belt sander, liked it very well.

The wheel seems to be very well balanced, solid, smooth bearings, it has excellent resilience, proper durameter. I'd recomend them to anyone that has a use for a quality contact wheel, and doesn't want to spend a small fortune. I will be buying more in the future.

The wheels run true and they run smoothly and quietly very little noise from the bearings the contact rubber is firm enough that you dont get chatter when using it I have a 4" and 10" wheel