The seat has a lot of good. But the wheels are just too tall. I am 6 feet tall and the wheels are so tall it makes it unstable even at the lowest height. Also it does not go low enough to work comfortably on items below a foot off the ground. Finally the lift piston will not stay seated in the base. So I got lower 1.5” wheels and I tack welded the piston to the base and it now works nicely. I know I make it sound really bad but it is not. Just slight changes. Also the tray makes the chair UN useable in close quarters. I never use it.

Ordered 84" x 4-1/2" and received the 5-1/2" fork. They seem a bit thin, but you get what you pay for. They will work, just a bit sloppy.

We had class IV forks that are 5" wide so these fit perfect! To be honest we didn't think it would as heavy duty as they were due to price but they are good quality for the money. Gave it 4 stars only bc they did bend a little when trying to lift a 2+K payload. Would definitely recommend these but my advice to you is NOT to go past 50% or your original forks. Ours are 46" and we used the 84" extensions and it works fine but you will bend the ends if you do what we did or you have shorter forks. Other than that they do the trick... Bent alittle but came back into shape for the most part when the weight was removed.

Just as described

No problems, arrived as described in the advertising. Was shipped on schedule and received with no damage or problems. Payment was processed through pay-pal with amount that was agreed too!

I bought these to extend the length of my tractor bucket forks. They are not designed for that purpose but are designed to extend forklift forks. The difference is in the steel loop at the end of the extension. It's designed to go around the bottom of the forklift fork and hold the extension in place. On bucket forks, there is a bracket for a wooden upright stop which prevents this extension from anchoring the way it's supposed to. I had to bend the loop down to allow the extenions to lay flat on the forks. This worked like a champ and allowed me to PU a complete chicken coop and move it to a new location.

good

Worked great at a good price.

I am well satisfied with the product. The only thing I would change would be the loop to secure the forks. I would make the loop out of flat metal which would make it less likely to bend.

Good product for the price.