All

Customer Reviews

  • 4.8
  • 4.6
  • 4.6
  • 4.6
NW COMMUNICATIONS INC NW COMMUNICATIONS INC
Double acting 12v hydraulic pump 4 quart steel tank.
I purchsaed this pump for a 12 foot tilt trailer that had a valve on the ram going port to port a manual setup. I read a lot of reviews and I was worried about a lot of people having problems with trying to find some non standard British fittings. It came in the box with 4 fittings. I removed the ones in the pump replaced them with the other provided. I made two hoses up for exact fit. Everything I used was power steering ram fittings. Welded a piece of flat bar 2"x3/8 8" long to the frame for mounting. I bolted the pre threaded pump block with M10-1.5x35MM to the welded flat bar. The the port coming out of the relay valve with the red knob on it is the pump (up) button and the other side of the block is the the (down). I adjusted the pump so it would not over pressure up or down, so it would bypass at a reasonable pressure. It lifted 2800Lbs with ease. The unit was properly prewired. All of the electrical stud contacts had to be torqued. Be carful the isolated relay contactor is a cheaper one but sufficient for the load. I Used two number 2 wire with no voltage drop at 3' long. Pump is fast. I installed some baffles on the hoses at A-B outputs to tame it down little. I dont think the solenoid and relays are water proof. If this thing will be exposed to weather I would build a cover over the pump electronics. I have only ran it 30-40 times to soon to tell if it will last. Good design well made product for the money. Unit came packaged good.
Hydraulic Power Unit Hydraulic Pump Double Acting 20 Quart Dump Trailer Pack
0
larry c tuell larry c tuell
ports are not SAE#6 as described, they appear to be M12x1.5 Metric.
Doesn't use standard fittings. Made it hard to hook up.
0
shane eastburn shane eastburn
Good pump works as it should
This pump will only hold one direction. I you're looking for a push pull hold both ways it will not work, if you reverse your lines, it will fall
0
Oscar Oscar
Very powerful
This replace the original that came on my gooseneck trailer and it has a bigger motor and stronger and faster too.
0
Nicholas Schaefer Nicholas Schaefer
Looks good
The pump looks great and looks like it will work great even showed up a day early. But it was left on my front porch instead of back door like instructions say to do. This would get 5 stars but leaving it out front pisses me off.
0
marsha probst marsha probst
The excellents of satisfaction
Great product with backing of amazon .
0
Claudia S. Claudia S.
Pump, Pump, Pump it up!
Got this 12V pump for on-board hydraulic system on a trailer with Hydraulic dove tail. Compact and heavy duty for what we need, should be a winner. I have a larger trailer with similar but dual pumps on it. Will write back if there are any issues once finished with project.
0
Jose Jose
CEO
Good equipment. Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw) and a 20-quart reservoir. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI; the flow rate is 2 GPM, and it is a double-acting pump for both power up and power down. Easy to Use: This 12V hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. It includes a 15 ft remote control and two additional SAE#6 connectors are provided for replacement. Reliable Quality: The dump trailer pump is made of sturdy metal; thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with a relief valve, it avoids overpressure, safer and reliable. Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil; it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time. Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a direct replacement for 12V DC remotely controlled hydraulic systems. Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw) and a 20-quart reservoir. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI; the flow rate is 2 GPM, and it is a double-acting pump for both power up and power down. Easy to Use: This 12V hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. It includes a 15 ft remote control and two additional SAE#6 connectors are provided for replacement. Reliable Quality: The dump trailer pump is made of sturdy metal; thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with a relief valve, it avoids overpressure, safer and reliable. Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil; it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time. Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a direct replacement for 12V DC remotely controlled hydraulic systems.
0
Paul Hauser Paul Hauser
15 Quart Double Acting Hydraulic Pump Dump Trailer Repair Car 12v
0
Vevor Customer Vevor Customer
Easy to hook up
Very nice used it on a car trailer
0

People Who Bought This Item Also Bought

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7; Saturday to Sunday, 08:00 - 15:00, GMT-7 ©2009 - 2022 VEVOR All Rights Reserved