All
Account
Amazon Customer Amazon Customer
75 mm
TAKE IT APART FIRST!
Five stars because WITH an Amazon next-day replacement we were able to get ONE good vise out of TWO.This is a great value IF you take it apart COMPLETELY right away.You can see complete threads in the hole in the first picture.You can see cast iron that was stuck on the hold-down bolt in the second picture.You can see where the residue came from in the third picture. There was not enough thread left to hold the fixed jaw down with any confidence! NOT SAFE for milling!For this price it is unrealistic to expect stringent quality control.But it IS realistic to expect the device to provide safe service.The fixed jaw on the replacement Amazon sent (REALLY quickly!) had complete good threads. Bolts HAD been a little overtightened, but not enough to strip out the cast iron.Quality control gives more reasons to take it apart FIRST:- many of the holes are not deburred, so parts will seat better after a little scraping- many edges are sharp (SOME have been eased) so being able to stone contact edges is appropriate- some of the grease is misplaced (the contact button needs more lubrication to do it's job correctly)- EVERYTHING needs to be FULLY cleaned because there is grinding detritus all over the vise!With the above taken care of this is turning out to be pretty nice. It is MORE accurate than my drill press, but we'd have to spend some time on a surface place with indicators before we'd be comfortable with it on a milling machine.If I DO get some surface plate time I'll report back on how well it meets its specifications.But with simple checks against squares it is already a five star value... AFTER Amazon's excellent replacement actions!
VEVOR 4'' Lockdown Vise Milling Drilling Machine Clamp Vice Precise Scale CNC VEVOR 4'' Lockdown Vise Milling Drilling Machine Clamp Vice Precise Scale CNC VEVOR 4'' Lockdown Vise Milling Drilling Machine Clamp Vice Precise Scale CNC
0
MisterFixIt1952 MisterFixIt1952
125 mm
Just the right size for my mid-sized mill.
I bought this for my Grizzly G-0704 mill. I have one that I use on my round column mill/drill. The 5" vise is a much better size than a 6" vise on a smaller hobby-sized mill. They don't stick out in front of the mill and weigh much less than a 6".
0
Dan M Dan M
150 mm
Great vise at a great price
Vevor had what we needed; price was great and just as importantly, it was shipped quickly.
0
Mike Ellingsworth Mike Ellingsworth
125 mm
very nice , well worth the savings look at the you tube videos on it
It is very nice but I had to order the 3" with adjustable round base as the 5" was to big for my mill ! Be sure to get that round adjustable base, if you dont use it you can set it aside, If you order one with out the base you can not go back and buy it separately
0
Vevor Customer Vevor Customer
150 mm
It looks good. it nicely machine and opens and close smooth
It looks good .it nicely machine and opens and close smooth. For the prize cant go wrong.
0
Tom Tom
150 mm
Great value
Using the 4in vise on a smithy Midas 1220. It fits the slide perfectly from side to side and must be bolted at the cross keyways. I rated the product on it's cost, and it showed up with only a mild cleanup needed. It will surely give years of dependable service.It arrived quite fast, and while packaging was a bit lacking, there was no damage to it. It is a big chunk of metal after all
0
Buyer Buyer
75 mm
Great value for the oney
some quick filing to remove sharp edges, degrease mount and tram. Basic vise that exceeded my expectations based on other reviews. If you want high end accuracy and quality quit shopping for bargain basement prices as this is good quality for the money and I would purchase again.
0
F2 F2
150 mm
Nice!
Looks well built better quality than I expected for the price same features as much more expensive vises comes with hold down studs.
0
Kevin A Kevin A
75 mm
Impressive for an import vise (5")
This review is for the 5" model. I am really happy with these vises for the money (bought 2) I am using them on a made in spain bridgeport clone and I have no complaints other than that the included mounting hardware is absolutely worthless. Throw the bolts in your junk bin ASAP and take $10 out of the hundreds you saved by buying an import vise and buy some made in USA T nuts and some grade 8 bolts
0
David Dennison David Dennison
150 mm
a no brainer
This vice works great on my drill press well worth the money!! One caveat, I had to deburr the whole vice many verysharp edges!!!!
0

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7