VEVOR Pressure Pot 2.5 Gallon 10 Liters Spray Paint Pressure Pot Tank with Manual Mixing Agitator Paint Tank

Replaced an old Grizzly pot that was nearly identical. Worked great right out of the box (except mounting of casters).

Worked great on staining my house

I just love this pot! I didn't have to do anything to be able to start my resin project right away! It was ready straight from the box and has been a fabulous addition!

What's not to like??? Impressive, heavy, stout little 2.5gal 10L tank! What's good: no leaks, nice sealing ring gasket, port to add more paint, casters, heavy weight (won't tip over), sturdy half-ring handle on top which allows user to set lid down for easy cleaning, stainless steel pickup tube with user-replaceable screen (this appears to line up well with the bottom of the stainless liner), two strategically places stainless steel ball valves (handle can close valve in either direction to avoid interference with paint hoses), stainless steel removeable liner with flat bottom (I can insert various size plastic mixing containers for small batches), mixer with crank (I was able to fine tune the height by re-positioning the shaft collars; nylon mixing propellor can be removed if not needed; I removed the crank & will adapt the shaft to a cordless drill for quick re-mixing during spraying), tank appears to be powder-coated with a solvent-resistant finish (doesn't come off or get dull when rubbed with automotive lacquer thinners), glass-faced pressure gauge, solid brass pressure safety and tank venting valves; no problem changing the quick disconnect nipple to a 1/4" npt high-flow version compatible with Prevost couplers; the four very large wing nuts make sealing the lid easy What's OK: mixing shaft is chromed steel with a smooth finish, not stainless (it is magnetic), chrome plated steel paint manifold on lid. Feedback: make *all* wetted part in stainless steel for corrosion resistance and waterborne finishes Gold painted Harbor-Freight style mini regulator. I had to sand off a few pimples of powdercoat off the tank rim where it meets with the ring sealing gasket on the lid, to make sure the gasket would not get damaged or deformed in the long run. Summary: professional architectural woodworker with decades of experience with Binks, Devilbiss (Tekna) spray guns, catalyzed conversion varnish (latter is acid-catalyzed, hence I prefer stainless), automotive lacquers, polyester & polyurethane finishes, contact cement This tank is on par with my 1981 era Binks tank, although Binks has a custom manifold which is cleaner and neater in comparison. I recently bought a Harbor Freight tank for $90 as a "beater" for spraying contact cement . . . for a few bucks more, I could have bought one of these. If you scour the web, you will find the very same tank sold at higher prices by other name brands. Would I buy another Vevor tank? Sure! The larger 40L 10 gallon version looks like a good candidate, particularly for eliminating bubbles under vacuum and the flat bottom removeable stainless steel liner is a major plus!

Very good quality lite to move around keep the gun clean and you will not have troubles Would Recommend!!!

Product worked well, the overall 4 star and feature rating were given for the clear coiled up hoses, they seem to have a coiled up set to them, a need for a much more flexible hoses are needed. I zip tied them together, but they were still a pain to work with. The spray gun worked well for heavy latex material, locking nuts should added at the factory level to the adjustments as they can be accidentally moved easily,. Overall a good product for the money

I primed and painted a full house inside and out and it held up pretty well, the filter and nozzle clogged up a couple times but it’s easy enough to clean with the provided cleaning tools

I have bought several and on several occasions because I found it to be a very good piece of equipment. I have used it for painting marine structures, gas pipelines and industrial applications with good maintenance it can be used for a long time. the small valves are fragile but for the price it is a very good choice.

I honestly didn’t expect this product to be as quiet as it was, it was a very pleasant surprise. The three airbrushes work fantastically and having a lid on one was outstanding. The ease and use is simple and the cleaning process very easy. This product is great for cookie decorating as well as for plastic models, when you need precision brushing as well as a broader area to color. Love this!