| Difficulty | Cost | Time Take |
| Beginner | $100 | Less than an hour |
However, the more shelves we have, it looks insufficient to store things. Building a DIY pipe shelf will be a chic addition to your room and kitchen. Vintage, industrial looks are likely to draw you in. It makes a room look modern and decent. Particularly when it comes to the main focal point of a wall or a room.
It provides the perfect industrial edge to your house. If you want to give your kitchen a lightbulb moment with budget-friendly shelving. Maximize your vertical space and make it a better place for organizing the materials.
Want to make your own DIY pipe shelves? Here’s a detailed guide to walk you through the entire project.
Table of contents
Essential Tools and Materials for This Project
Tools
- Drilling Machine
- Screw Driver
- Ladder
Materials
- DIY industrial pipe shelves
- Boards
Planning Your DIY Pipe Shelves
A DIY industrial pipe shelf is an easy weekend project that requires no skills. Whether you’re looking to fill a blank empty wall or want to create a storage option. It adds a rustic charm to every place where they are built. If I say these DIY pipe shelves add a stylish urban farmhouse vibe to your place, then nothing is wrong with it. Without spending thousands of dollars, you can build your own DIY industrial shelving according to your budget.
First, you need to decide what kind of shelf design you want. Do you need shelves floating on the wall, hanging with the ceiling, or connected to the floor? Before building your DIY metal pipe shelves, keep these things in mind. But in this DIY shelving with pipes guide, you’ll learn to build a wall-floating shelf design.
Step-by-Step Construction of Your DIY Pipe Shelves
Without wasting further, let’s start constructing your DIY pipe shelves with all the easy steps:
01- Assembling of Industrial Pipes
Use the manual guide to assemble the industrial shelves. It’s a pretty simple process. You just need to attach them carefully. These industrial pipes are from VEVOR, and they take no time to assemble.
02- Screw and Drilling
If you want to build a wall-floating DIY pipe shelf, you need a ladder. Place the industrial pipe shelve over the wall; drill the holes while holding your black pipe shelves; DIY and fix a bolt.
03- Take Measurements and Place Plywood Board
Measure your space and find a good-sizing stud. It’s always a good idea to take measurements. Because you can end up installing the DIY pipe shelves in the wrong way. Now add boards and screw the other industrial pipe shelving between them.
04- Supports You Want For Your Pipe Shelving
Here’s the time when you need to decide how many support brackets you need for your industrial pipe shelves. Some people only install two, and some go for three support brackets. But keep in mind that you’ll never get enough support from two, which you can get from three.
04- Place Items
You can see there are only three boards placed, of which two of them are half.
According to your taste and design idea, you can add the boards. These DIY industrial pipe shelves will only take a few minutes to install. Comes with a sturdy structure and durability and can run for a long. Even a budget-friendly one. It’s a good idea to use these DIY shelving with pipes when you’re not able to find labor. Woohoo! they save labor costs, too…
Common Mistakes And Tips For Building DIY Pipe Shelf
To save yourself from hustle and frustration while installing DIY industrial pipe, make sure not to repeat the mistakes that DIYers make.
1- Skimping on brackets and screws
Mostly homeowners deem the screws they get with their package unnecessary and end up using only a few of them. Due to this, there’s a high chance of the shelf crashing on the floor at some point. There’s a reason you get a specific amount of hardware with your package, so try to use all of them.
2- Unlevelled
Usually, when installing a DIY pipe shelf, it might look tempting to eyeball a place where you want to place shelf brackets. But later on, when you come up with using a spirit level, it creates problems. What do you do when your bookshelf is crooked and slides onto the floor? For guidance, establish an edge and draw a line with a pen.
3- Bad Location
Sometimes, many people place a shelf on a specific location on their wall and later realize it’s falling off. To keep the shelf secure, make sure to keep one stud inside the wall. It’s a better idea if you install a DIY industrial shelving near a light fixture. Otherwise, you can strain your eyes while finding a book.
4- Make a Plan
Before installing DIY industrial shelf, write down the plan for installing a DIY black industrial shelf. For example, if you’re planning to install the shelves without studs, then you must have molly bolts or self-tapping bolts. It’ll be helpful for you to make these preps beforehand.
FAQs about DIY Pipe Shelves
1- How much weight can a DIY industrial pipe shelf hold?
They’re sturdy and made up of heavy materials, so they can hold up to 150lbs.
2- What type of pipe can you use for making DIY shelves?
It’s recommended to use DIY industrial pipe to make shelves. As they’re cheap and a great investment, you’ll do. You can place any heavy items on them.
3- Which metal is used for DIY pipe shelf?
Steel is one of the most famous metals in making DIY pipe shelves. This is due to the steel’s versatility and durability properties. Many offices demand stainless steel shelving requirements as steel is sturdier than any other metal.
Conclusion
It is such an easy process to install industrial pipes. No labor is hectic, and no need to pay hefty amounts. These sturdy DIY metal pipes should be every homeowner’s first priority. Working on a new project or planning to install DIY industrial pipe shelves. Choose VEVOR over any company. So don’t wait until they stock out.
