VEVOR 15L Upgraded Ultrasonic Cleaner (600W Heater,360W Ultrasonic) Professional Digital Lab Ultrasonic Parts Cleaner with Heater Timer for Glass Dental Instruments Cleaning

3L model . Found the reason some people complain about smoke, well part of the reason. I thought the bottom panel looked like it had clear plastic on it like the lid has blue plastic. I tried to peel it off, but I couldn't because there wasn't any plastic on it. I thought maybe, I just wasn't able to peel the plastic. Being the OCD Mr fix-it man that I am, I decided to void warranty and remover the bottom panel, and heat it with a heat gun, to maybe help remove the plastic. As I said earlier, there ended up not being any plastic, BUT the heat gun revealed some spots on the metal. As you see the spots in the pic, those spots didn't show up until they were heated by my heat gun. My best guess is it is some sort of oil residue from the machinery cutting the holes in the panel, like cutting oil machinist use. It could possibly be something else from the parts above, that maybe dripped something on the bottom during manufacturing. It is not from use, because I took it apart before I ever used it to see why people said it was smoking. Now the good news, it didn't smoke at all. I'm not sure if it was because I already burned the mystery stains off or some other reason. I did notice that the instructions warned more than once to unplug when done, and to also make sure the outlet used to plug it into, has ground. For those not sure how to do that, you can buy an outlet checker here on Amazon. An outlet checker simply plugs in like everything that plugs into an outlet, and let's you know if hot, neutral, and ground are wired correctly. It's a good idea to check all your outlets with such a device. I suspect some of the bad reviews may be the result of using bad outlets. For those wondering about minimum water level, the manual says simply, be sure there is enough water to completely cover whatever you're cleaning, and no more water than the maximum line in pan. It also warns about using no water, which I also suspect some of the bad reviews may be because of that. All that sa

Very satisfied with purchase. I would purchase this item again. The item arrived professionally packed. This is a really good company.

Cumple con los objetivos

Thot it would be bigger. But it did what I wanted it to do barely. Good product said 15L should be 3.96 us gallon. Not quite 3 gallon to fill full. But then you have to fill to line to have room for you part to fit so you have no over flow. Barely got my parts in it. Did an amazing job cleaning. Pretty happy with it.

Like it

I feel like if I were making something that vibrates out of all thin metal parts, I would use thicker metal, or use sound deadening on the inside of the exterior walls

I use this exclusively for cleaning brass cases (for Reloading ammunition). I bought it as a replacement for a Hornady Sonic cleaner when its electronics failed on me after only moderate use. So far I am pleased with this cleaner/unit. Two points: First It would be nice if temperature reading had a Fahrenheit (as well as the Celsius) setting or display. Second the stainless steel mesh basket in the tank is to coarse of a mesh/weave. It allows smaller cases to slip through. I use the old units mesh basket that has a tighter mesh/ weave. Longevity will be the ultimate judge

Can't say enough good things about this machine. It did a awesome job of cleaning the items we used it for.

I have been using this heavily for about 6 months and is working great. Triple Carbs from boat Moto to tools and everything in-between. I even put in the wool polishing pads from orbital polisher and they came out like new. Tip! - Fill unit with water and put everything into GLASS JARS with your cleaning solution and float them on the top of the water. The unit stays clean and the items get just as clean as they would inside the unit. (pulses go right through the glass) Don't use Plastic it doesn't work very well. It is easy to separate items this way and to use different cleaning solutions in each of the different size jars. Experiment a little, OK? You end up saving a ton of money on the cleaning solution as you only use a tiny bit in the jars. Put a plastic trash can under your work bench to drain your unit into after use to keep it dry. My unit looks like new because I have never put anything dirty inside it, only in jars in the water bath. I will be looking to install some sound deadening material to the inside walls to help with the noise issue and will report back on that once completed. So Far so good. Cheers!

Purchased for cleaning brass and old carbs. The heater worked great, I primed it with hot water and it kept it really hot. Cleaned brass better than expected after 5-8 minute runs. Hopefully it lasts.So far so good!