Customer Reviews for VEVOR Cable Railing Kit, 32 Packs T316 Stainless Steel Jaw Swage Turnbuckle, Fitting 1/8'' Cable Railing System, Fork Jaw End Fitting for Stair Deck Railing, 180° Adjustable Railing Hardware

Worked well after learning how to use correctly. There’s always a hard way and an easy way with everything. Make sure to use STRONG connections at the bottom of your posts (whatever your posts are connected to) or else your posts will lean in the direction these are tensioning. These are strong.

Vevor 22 Packs Cable Railing Kit Swage Threaded Stud 1/8'' Ss316 Stemball Swage

product was used in cable railing system. works as it should. The price was the best that I found.

I build custom handrails. I love the looks of cable handrails and these contribute alot to a great professional and clean look.

These worked well and look great. I would buy them again.I used them in 4 x 4 wooden posts. I drilled a 5/16" hole all the way through the post. I then drilled into the same hole with a larger bit going about half way into the post for the head side of the swage. This left the side that the cable comes out neat and clean and barely larger than the cable.When I cut the cable, I held it up along side the post. I cut the cable so it would go half way through the post. after I crimped the end on the cable, it was the perfect length and tightened up nicely. It might have worked slightly better if I had put a little lubricant on the threads.

I recently used them ondeck handrail project

They were pretty easy to use. I bought the hand press to crimp the ends. I'm not sure I could have done it without the press.

This Threaded Stainless Steel Swage is very easy to install

Worked perfect for our cable deck