Customer Reviews for VEVOR Swimming Pool Pump 1.5HP 115V 1100W, Single Speed Pumps for Above Ground, Powerful Self Primming Pool Pumps w/ Strainer Filter Basket, 5280 GPH Max. Flow, Certification of ETL for Security

Only been hooked up but definitely higher power on the return to the pool my pool is circulating 100% better I hope it last

Works great and was about $400 cheaper than what the local pool company wanted.

Easy to install and excellent look and features

It runs good rest of filter not working so don't know yet

The pump was a good fit for my pool.

This pump works great. And you can't beat the price. Easy to install, was done in less than a hour

This pump took over the jump when my old pump died at the beginning of summer. So, far this is working great. It pumps out a lot of water and runs good. It is easy to open the top lid and clean out the basket. The pure copper motor should provide seasons of fun in the water. Circulates the water well for my 24 foot round pool. Trust you found this review honest and helpful:-)

For the price, this is a great Pump! I replaced my 1 hp Pentaire with this pump and it works great. As always when you change manufacturers you will have to re-pipe the filter to the new pump. The pump came with its fittings for the intake and output and it didn't take much to adapt it. I have solar heating panels on the roof of my house that peeks at @ 14' the pump has no problem holding the pressure as it pumps up to the panels. The pump is quiet and primes itself. Just remember it is not necessarily about the HP as it is about the Gal.Per.Minute

Quietly moves just as much water as the 14 year old Doughboy pump with howling bearings and a leaky seal that it replaced. It has vents on the bottom side that are right next to motor windings and make me question whether it's really safe to have in a wet and/or outdoor location. I verified my GFCI circuit breaker was working and mounted the new pump inside the outer plastic housing of the old pump to make myself feel better about this - the motor diameter was the same, so this could be done with only a moderate amount of effort. If it starts tripping the GFCI all the time, I'll update this review. The factory extension cord is attached under the "end cap" with spade connectors that make this easy to integrate with old wiring. The end cap hardware is quite magnetic - so not corrosion resistant and this is all going to rust in the presence of chlorinated pool water. There's no seal, gasket, or O-ring under the end cap. Another questionable safety decision. Another reviewer mentions that the white plastic hose adapters are not the right thread type. I can confirm this. With egregious amounts of teflon tape, you can slow the leak to a drip, but not stop it. You'll need to get different fittings. This reflects poorly on the outfit that got this wrong, but the people packaging the fittings with the pump are probably not the same ones who designed and built the pump - which appears to be perfectly reasonable quality. Spectacular quality for the price paid.

This pump works great love it, 2.0 HP