Customer Reviews for VEVOR Electric Chainsaw Sharpener Kit, 35000RPM Electric Handheld Saw Chain Blade Sharpener, 6 Speeds Professional Chain Saw Sharpener Tool with 4 Titanium-Plated Sharpening Wheels, Angle Attachment

Well may have been built on a Monday after rough weekend cut one angle turned to cut other did great then when I went to cut other way motor was hot as heck think switch was bad or motor this happens am going to get same kind try again will give update / This one is working fine some times something didn't get soldered right in motor it happens but this replacement is working fine happy with it try to use files mostly but comes times chains get to dull this save me time and money

This saw chain grinder works good enough for home use. Angle adjustments are accurate enough for a chainsaw. Chain vise is stable. as I would like but still works just fine.

Unit arrived well packaged; assembly was fairly easy except for mounting the grinding wheel. The directions shows that you have to insert a key into a hole in the arbor via a hole in the wheel guard. The problem is that the hole in the wheel guard does not line up with the hole in the arbor. Had to insert the key at an awkward angle. This made getting the wheel on and tight difficult. The chain clamp does not clamp the chain when it is in the groove. The clamp will work without a chain in it. Need to try and adjust it so I can get a chain to clamp before I can actually use it. Had to go back to filing my chain until I can get time to see if I can get the clamp to work. May not need the clamp as the stop may be able to hold the chain in place while grinding. But with wood to cut I have not had much time to play with it.

This product has worked well for me. I'm happy with the purchase and with the sharp chains.

This sharpener gets the job done at half the price of the high price models. Easy to use and set up.

This was a gift for my husband. He really liked it.

Made well... A little bit of patience is needed putting together. Not the easiest to install the grinding disk. There is a hole at the bottom between the disk and motor to keep the shaft from moving when installing the disk. Slide a small screwdriver in the hole to hold the shaft. Practice is a must so use a crappy chain until you get the hang of it. Grinding disk is fragile so get a better one from the start.I'd buy again for sure. Just replace the disk from the start.

Very easy to use… product works great

This a very good quality for being half the price of an Oregon. I have used an Oregon and I can't see or tell the difference.

Great Machine good quality