Customer Reviews for VEVOR Electric Brushless DC Motor,72V 3000W Brushless Electric Motor,4900RPM Brushless Motor Kit,w/Controller and Throttle Grip for Electric Scooter E Bike Engine Motorcycle DIY Part Conversion Kit

Great motor for value and I will be using this in my mx650. It's a very powerful motor and very snappy and a blast to use.

Well packed, included all but the chain, assuming it must be being shipped separately because it wouldn't fit in the box.Was interested in seller's suggestions for battery and the possibility of adding heat sinks or fans to cool what my education tells me may be an under Amp. controller upgrading to the 50 Amp. controller may be the smart plan.Contact with distributor is not user friendly so far.

Has enough power to push this gem around!

It came in great shape, will help finish up my project. Will work great in my project when finished .

I've had this kit for nearly a year now. This kit is constantly fluctuating in price so you could get this for roughly $80 which is insane value. The motor is the real valuable part but the stock controller with the proper battery can be alot of fun too. I have it fitted on a razor mx650 which requires the motor mount to be removed. This can theoretically fit any project. With stock gearing and a 14tooth front sprocket and a good 48v battery i was getting roughly 27ish mph with a 150lbs rider. It was decently quick but throttle was very touchy. If you know nothing about wiring something like this, I'd suggest watching a video because it can be confusing if you don't know what your looking at. The controller can be upgraded easily to something like a kelly controller that is much smoother and is able to be programmed as well. My current setup is the stock motor and controller that this kit comes with but with the "shunt mod" applied which takes this kit to an absolute monster for the price! I have it paired with a 52v 20ah Eon lithium battery pack and it absolutely rips! It does 37mph with stock rear gearing and a 14t front. It gets there really quick and will pick up the front wheel at any speed. Overall, if you are willing to learn there is really no limit but your pockets. I'd strongly recommend this kit if you can get it for under $100. Good luck!

Easy to install in the Razor MX650. Simply cut off the motor mounts, counter sink the end cap screws and it mounts in place of the original motor. The throttle is a bit sensitive but when twisted slowly it's manageable. Remember to connect the electronic lock or the motor won't operate. I used a loop of wire that I can remove for safety purposes.

So much torque I had to gear it higher. Quite and strong. This thing is fun wish I had more.

I bought this kit for my razor mx500 and powered it via 48v 20ah lithium ion battery pack and I'm pleased. The motor is very quiet, has decent torque and great top speed. Install was a bit of a hassle as I had to cut off the base plate and countersink 2 of the 3 screws holding the motor together so the motor would fit in the rear swing arm and then i had to reuse my old 11 tooth t25 sprocket but it wasn't too hard to do. One thing I've found is the throttle response is super sensitive which makes slow cruising a bit tricky but overall I have no complaints!

great kit for the price should probably get better bolts for the motor though