Customer Reviews for VEVOR Aluminum Roof Rack 165LBS Roof Top Cross Bar Set Locable Roof Rack Crossbar luggage Baggage Carrier, Compatible With Jeep Renegade, 2014-2018, Silver

These crossbars look like they came from the factory, which is exactly what I wanted. I did have to go to the hardware store to get 2 screws for the back piece, the ones provided were just a tiny bit too short. Easy to install and very happy with them !

Fit my 2016 Ford With Explorer limited Edition.

The product has done great so far I. My husband 2018 Ford Explorer. He was able to install it himself without any help. My only complaints is that in the instructions it mentioned the the bars could fit into any of the slots but when my husband attempted to move the back bar up, it was not long enough. Over all the bar is awesome and we had and Our belongs were secure over a 700 mile ride.

All in all it was a great purchase!

Nice styling and sturdy. Fits perfectly with the rear-most bolt holes in the side rails using the Ford tie-down bolts that come with the vehicle. I bought a roof basket to attach to these racks and the basket's length required locating the rear rack in the forward screw position. Unfortunately, the rack cross length was too short to mate with the width between the side rails in that position and I had to perform a field modification on one of the end brackets. Redrilling the holes worked fine and there was no compromise in strength. Extra holes in the bracket would have been a nice touch. Anyway my alteration wasn't a problem during a 2000 mile road trip to Canada loaded with heavy luggage. I leave the racks on the roof fulltime and haven't noticed any additional noise. I do take the basket off of the rack between uses because the basket does roar pretty bad when not filled with cargo.

Looks great! Perfect fit for my 2016 explorer

The cross bars were easy to install and look great. The noise issue is interesting. Usually they are completely quiet. I have driven long road trips at various speeds with no sound. Then sometimes they become quite noisy, but only for a few minutes. This usually occurs in the 35 to 45 mph range. And then just as quickly as they start to whistle, the noise stops.

Attached cargo basket to them, saved room in the vehicle.

Working for County that just started renting cars, it became apparent that we, the employees, could no longer modify our vehicles from drilling holes or permanently mounting antennas or other equipment mounting hardware to the roofs as we had done before. This now left us with having to come up with cost saving and other methods that would not reduce the cost of the vehicle when it is finally returned back to the rental company. So being able to purchase OEM crossbars less than what the dealership charges for a 2018 Ford Explorer got me the approval I needed quickly and back in the field with the equipment I use everyday! Thanks!

So, this rack is not a perfect fit for a 2018 HR-V EX model, but I believe it will do an adequate job for carrying small loads. The product does not come with installation instructions. I found a post by another HR-V owner who installed this unit, so I was able to follow that guide somewhat.Some of the issues I had:The black rubber weather protectors for the ends of the rails simply don’t fit in the rail gutters; the ends of the rubber guards pop out of the back rail gutter slightly.The metal expander pieces didn’t fit into the passenger side rail gutter. I had to remove them from the rail and compress them slightly to get them to fit prior to installing the passenger side roof rail.The crossbars are another issue. The screw holes for the rubber inserts for the ends of the crossbars don’t line up exactly, and I needed to expand the holes in the rubber with a drill in order to get the screws to thread. The screws themselves thread at an awkward angle, and the included allen key is not an adequate tool for tightening the screws (unless you want to spend two hours turning the screws a quarter turn at a time).Finally, the silver caps for the holes on the rails do not always sit flush with the rail. The included plastic inserts are brittle and break very easily, so be careful. The included adhesive strips for these pieces don’t seem like they will last. Only time will tell, but installing these caps was one of the most frustrating parts of the installation. Make sure you install the caps prior to installing the crossbars.Given that there are limited choices for after market roof rails for the HR-V EX and LX models, this will suffice, but I may remove this and reinstall the weather stripping if I decide to sell the car.