VEVOR US EN
Select the country/region, language, and currency you prefer for shopping.
Delivery to
Your Address
Hello, Sign in
Account & Order
2-day Free Delivery 30-day No-hassle Returns 12-month Warranty

Customer Reviews

  • 4.8
  • 4.6
  • 4.6
  • 4.7
medicgary medicgary
owner
it was just like it was showed i am having a little hard time with the gas tube but i can get it to work out
0
Donnie Donnie
Foundry Furnace
I've been using this almost every day for the last few weeks and it works like a charm. Good quality.
0
Rob Rob
owner
I bought this to just melt down aluminum cans, but find myself using it for more. I did a coat of refractory cement, which just adds another layer of insulation. Everything was good quality, although the gloves didn't last very long, I'd pick up a pair of higher quality gloves with a fire rating.
0
Phillip Sand Hansel II Phillip Sand Hansel II
Mr.
The forge melts aluminum quite well. The gloves are inadequate heat shields for the hands. The “ingot mold”, it too small for anything other than gold. I had to buy a realistic sized one independently. Both the firebrick and the crucible arrived cracked. Despite limitations, it is a low cost way to get in to melting metals.
3
Tim R. Tim R.
Good product
What i like is the furnace heats quickly. What i did not like was there was No set up instrctions it's best guess.
1
Michael Blaker Michael Blaker
Very nicely made.
Nicely made, good for beginners. Though it seems to be losing heat. Due to where the regulator connects, where the 3 square bolts are screwed into the furnace, and I watched a 5" flame blowing back towards the gas line. that is not a safe design. If the regulator had a small about of insulation wrapped around where it's inserted into the furnace, it would fix the problem with the logs of heat, and the flame escaping the furnace. If you were to chasms the regulator design from a straight pipe, to a 90⁰ angle at the connection of the regulator fits to the furnace would fix the problem of the flame blowing back towards the gas line.
1
C.A.T. CENTRO ASSISTENZA TRIVENETO DI WALTER PAVAN C.A.T. CENTRO ASSISTENZA TRIVENETO DI WALTER PAVAN
NON è TUTTO ORO QUELLO CHE LUCCICA
PRODOTTO MOLTO BUONO , E RISPECCHIA LE ASPETTATIVE . UNICO NEO ,L'ATTACCO PER LA BOMBOLA A GAS FUORI STANDARD E HO DOVUTO COMPERARE UN NUOVO REGLOATORE, E LO STAMPINO IN GRAFITE PER I LINGOTTINI TROPPO PICCOLO E SPROPORZIONATO RISPETTO ALLA CAPACITà DEL CROGIOLO.
1
VI REEL.ca VI REEL.ca
Well built product and easy to assemble.
Package arrived in good shape with all the parts and assembled easily. I am new to casting so I am not sure the volume of metals yet but my first try was a success with a 1 kg ingot of aluminum using just cans. I heated this furnace up until it glowed red inside and after cooling it showed no visible wear other than a few brown marks, so It appears this will last a long time.
2
Japonte Japonte
Works perfectly
Overall, very satisfied. I encourage those that grab one of these to observe all safety protocols. Motlen metal at 2000 F is not something to start without having done a fair amount of research and some experience really useful.
0
Corey Peterson Corey Peterson
Mr
Very easy to use. I have melter copper brass and aluminum. It would be a 5 star but the furnace only came with the ceramic insulation. I bout hellcote 3000 to finish it off.
1

People Who Bought This Item Also Bought

TOUGH TOOLS, HALF PRICE