Excellent tool,
This is a good quality tool for the most part with plenty of power, my only little gripe is that the Chuck key doesn’t seem to have the best fit with the chuck on the tool, definitely a little sticky .I can fix this, so for me it’s not worth sending back.
Farthion Farthion
A very good rototool
I've been using an old Harbor Freight Chicago Electric rototool that's about 15 years old and has seen some pretty heavy use. I'd already gone through one shaft and though the replacement was still going strong, I started smelling something electrical during use that wasn't normal. So, I decided to retire it and invest in a new one.I purchased the 560W version (the orange one), opting for the greater power and the metallic rotoshaft instead of the rubberized one I had before.In setting it up, I did notice that the cords were very short compared to the Chicago Electric one, coming in at about a foot shorter. It was too short to directly plug in and replace where I had my previous rototool. I had some spare 1 foot extension cords (the kind used to separate out power chargers on a single power strip), which closed the gap, so I made due. But if you have a distance to go for plugging in, this may not be long enough.Firing it up I was (and am) a bit concerned about the foot pedal. It's a lot bigger, but also a lot less sturdy than the Chicago Electric. But the CE version doesn't have a grounded plug to the new rototool. So I gave it a try (I can always swap out the cords if I get that motivated).The new rototool is actually quieter in operation, and somewhat smoother. I only ran it long enough to ensure that under usual conditions, there wasn't any stutter in the shaft. That's always an indication of insufficient lubrication (for those of you who may have experienced that with these) unless you're bending it at an extreme angle. Some white grease will fix that right up, but be sure to remove the old grease from the shaft cable as best you can before applying new grease.The one thing that made this four, instead of three, stars is that it's a 1/4" chuck. For a rototool, that's huge. It literally opens up all of the accessories that a small power drill has that come with 1/4" shafts. I had bought some roto sanding drums, but they were 1/4" and didn't fit my old one. Now I
Richard Richard
I've wanted one since I first seen them,I finally got one,wouldn't trade it for the world
I'm useing it to carve on wood
S-R Hanging Flexshaft Mill 230W 6mm Jewelry Design and Repair Tools
John Kisida John Kisida
Great Product, and customer service
The Vener Flex shaft is great, works great and the first one I ordered came in a broken box with missing parts and bent flex shaft. I sent my concerns and was sent another one and love it. I deeply appreciate the way customer service worked with me. I will always shop here when there's something I need. Awesome loyal company. I would recommend Vevor to all buyers. Thank You
Debby Rock Debby Rock
Use it for everything. Fantastic
Randy sellers Randy sellers
Still Waiting
I am still waiting on the manual. Been 2 months Nothing!
Leslie Tussey Leslie Tussey
Sr flex shaft grinder
Works exactly like it should!
Grits Grits
Good product, affordable price
Did everything that I needed at an affordable price. Well worth it.
jeff bell jeff bell
Well worth the money
Works well with plenty of torque and low vibration
Nine33 Nine33
Works great
No complaints other than foot pedal is lack luster

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7