Customer Reviews for VEVOR Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM Power Table Feed Mill 220V (450 in-lb X-Axis Torque)

Ive installed the X, Y and Z axis version of this on a Precision Matthews mill. The instructions are garbage, but overall the units are ok. Ive needed more parts for each one. Hardware for Y and X, a spacer for the Z and i also had to bore the sleeve in the Z kit .003". The bore, as delivered, was .623". Bridgeports and all the clones Im aware of have .625" shafts for the knee handles, so i dont know what that is all about. The O.D. of the sleeve was concentric to the middle, so it was an easy fix. Just dial in on the O.D. and punch the bore out a little more on the lathe. As for the rest of the things that werent right, its hard to blame the manufacturer, as all these mills have slight differences. And besides, compare this price to a Servo or even an Asong.

Fast delivery. Works as promised.

This is a great buy for the money. I do recommend throwing the instructions right in the recycle bin. If you run a Bridgeport enough to need a power feedthen this is a cake walk. They tell you to drill holes in the leadscrew. Just scripe the woodruff key before removing it and mill the top to 3mm to match the supplied bull gear. Once you screw on the extension with its key lined up with the original, the brass gear will couple the two together. I also took a quarter inch off the extension for a better fit. I've been running it for a few weeks no problems.