All

Customer Reviews

  • 4.8
  • 4.6
  • 4.6
  • 4.7
Brad Brad
30 x 20 x 20 cm
Perfect enclosure for a wide variety of projects
I bought mine for a home automation project. The enclosure is very well-made. The steel is thick and the powder coated finish is beautiful.
VEVOR Electrical Steel Enclosure Box NEMA 4 Outdoor Enclosure 16 x 16 x 8'' UL
0
C.R. C.R.
60 x 60 x 30 cm
excellent enclosure
This is a great weatherproof electrical enclosure.The mounting plate inside is excellent, and the bottom plate can be drilled out for weatherproof electrical connections.Only concern I have is whether the inverter I installed in it will overheat next summary when it's hot... no air flow/ventilation...
0
M&M_CUSTOM M&M_CUSTOM
40 x 40 x 20 cm
This enclosure is very versatile!
I ordered this enclosure fully expecting to have to cut the top protective panel off from it, nope, it is completely an included option, not connected from the factory- but can be very easily installed if needed.Next thing I found out was the door can be removed and flipped to swing the opposite direction, which I needed, in just 5 minutes I had the outermost "e-clip" removed from each of the hinge pins, removed the pins, removed the hinges from the factory installed right side- to the left, as my need required.I will need to make 2 unusually large openings in the top (reason for not needing the rain guard) and left side walls for easy mounting of 2 very large heat sinks capable of cooling 4 SSR's without an additional electrical circuit for a fan, and no need for holes in the cabinet case for air vents, which would allow dust to enter the case. This case will be completely sealed when I'm done.I want looking for a removable mounting plate inside, so there is another benefit to this enclosure.The page mentions the enclosure to door grounding wire is previously installed, but it was not, on mine, another benefit, since I had to remove the door to flip it anyway.The only thing I found that I do not like, is that grounding wire is just short enough, with the terminals supplied, to make me cautious of how I installed it, compared to how it will flex, bend, and twist, and potentially wear the wire prematurely.Bonus, the vevor name decal on the door is very easily removable, mine would have been upside-down, after the door flip.Time to start component layout and assembly, for this to become the control panel for my home fabricated powdercoat oven...I'll add photos or video later...I'm definitely giving this enclosure a 5 star rating, it definitely exceeded my needs AND expectations.
0
diydad diydad
60 x 60 x 30 cm
Well built quality box
Box is very sturdy and even came with ground wire for door ,din rail , a back plate, a rain hood,and even some mounting hardware. A enclosure of this size is around $500at the local supply house.
0
DJ DJ
25 x 20 x 15 cm
Good enclosure. Will definitely buy more.
Its a good enclosure, I bought it to design my own combiner box for solar. Nice design. I put it in the sink ran a lot of water on it, and no leaks.
0
ray vestal ray vestal
25 x 20 x 15 cm
So far so good!!!
I'm an i/e guy by trade and this enclosure is very nice for the price. Has held up well so far in full sun. Used for an automation project.
0

People Who Bought This Item Also Bought

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7; Saturday to Sunday, 08:00 - 15:00, GMT-7 ©2009 - 2022 VEVOR All Rights Reserved