Customer Reviews

Steve N Steve N
This is the best designed import button maker
I have 4 of the Vevor-style button makers. They work great. I like the rotating ones better than the slide ones but I can't find the base plates for the dies to make them swappable so I keep buying new machines. Once you get the procedure down, you can reliably crimp 100 buttons without a failure.Important information: There are metric and inch machines and parts. THEY ARE NOT INTERCHANGEABLE! If it says "75mm", the 3" is just there to help you understand the size. You MUST buy 75mm buttons. The same is true for 58mm and the other metric machines.Most of the metric dies are set up for plastic buttons. The backs are thinner on the metal buttons so you need a thin gasket in the die for metal backs.They can be finicky about the paper thickness. Try different papers. The standard one that works is Espon 27lb matte presentation paper.Don't try to cut the paper with scissors. You will fail. A cheap plastic circle cutter is OK for a few buttons. For many buttons, either get a punch dedicated to the correct size or use a craft cutter like a Cricut or Silhouette with the print and cut feature.These machines could easily be operated by a 6 year old. Teach a kid to make buttons and magnets and they will have fun for hours.
PiperV PiperV
Well-built, great value - parts sources are limited
Solid, tight with a quality annodization. No instructions, however, if you YouTube the Tecre machine there are several great instructional videos available. (when inserting the dies, make sure that the vertical metal bars on each lower die are positioned towards the middle of the unit)Purchased from seller "Mophorn" who shipped and answered questions promptly. Only worrisome point now is where to find button parts. Most domestic sellers specify that their parts only work in USA built machines. The design of this unit is quite similar to the Tecre (American brand) but it is the internal die dimensions which ultimately determine compatibility. Besides the fact that the button backs provided in the kit are plastic. I have placed an order with a company called "" (100 sets of 1-3/4" Pinned metal Back Buttons) and hope to trial them by the middle of May 2019. More to come.........5/5/19 UPDATE - Being unable to make more buttons on this machine than the limited number of starter parts provided, I purchased a quantity of steel backed 1.75" (44mm) button parts from [NO PROMOTION IS GIVEN HERE FOR THAT COMPANY ONLY THAT THEIR PARTS CAN BE MADE TO WORK] The steel pin backs are roughly 1/2 the thickness of the Mophorn plastic backs. Solution to using them in a Mophorn machine is to remove the pin from the back from one part. Place the back into the bottom of the die as shown in the photo. This becomes a spacer which makes the bottom die just the right height to function. Now just run your button making process as per normal and voila! You've got steel backed buttons and parts that are readily available. I have not tried any other supplier but my guess is that the end result will be the same.
Unknown Unknown
Handle may need to be adjusted to make it go down all the way
Seems like a decent button maker. Took sometime to figure out why we could not get it to go down all the way, turns out the handle was hitting a screw and needed to unscrewed a little.
Michael Michael
The button maker itself is great quality and very easy to use. However, finding parts for this thing is very difficult and frustrating, especially if you are looking to make better quality buttons with metal backings. It took me several failed attempts to realize that it wasn't me not knowing what I was doing, but instead it was that this machine doesn't play well with better quality button pieces (even though they are the correct measurements). I recommend going with a different option for a button maker. Would have saved me a lot of time, money and frustration.
Alex Alex
Good Customer Service
I originally received a defective machine, but I spoke to customer service and I was shipped a new one within the same week. The customer service is very understanding and friendly, and helps to solve any problems. The machine itself works perfectly and is easy to assemble.
We used this product to make over 2000 badges for our summer camp. It worked very well and our campers loved the buttons!! We will continue to use the button maker for our afterschool program and next year's summer camp!
Sheila shaw Sheila shaw
If you have any problems contact the company and they will get back to you ASAP.
This machine is great loved it easy to put together my 16 year old son put it together with no problem. Love it, the only problem I had was that I ordered the wrong size and I notified them and they got back to me very quick and solved the problem.
Magaly Magaly
Great machine however I don't think if it came with instructions I would be more delighted. Yes it is easy to put together but it took me an hour to figure out why it was not working. First the handle wasn't going all the way down and thanks to the review I read the man said he had to adjust the handle bc of a screw I did just that and that worked but then I damaged 5 buttons because I didn't know that there's a dial to turn for it to grab the pin. So all in all I suggest the seller provides instructions for people because there are no YouTube videos on this machine... and now I just hope that I can find the plastic back pieces for restock somewhere.
Ronald Pryor Ronald Pryor
75mm 3'' Badge Button Maker Machine + 100 Buttons Circle Badge Punch Press
Great product easy to use only problem I am unable to locate supplies from your web I have set an e mail with no response
Linda Crafty Girl Linda Crafty Girl
Awesome button maker
I love this button maker. Some of the reviews are negative but I truly believe it is user error and/or button flaws. I had a few that did not work out well but I noticed that the plastic on some of the buttons were imperfect with rough edges. Once I cut off and smoothed the plastic edges, I was on a roll with making buttons!

People Who Bought This Item Also Bought

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7 ©2009 - 2022 VEVOR All Rights Reserved