Customer Reviews for VEVOR Pure Sine Wave Inverter Power Inverter 2500W DC12V to AC240V Car Inverter

works well, very low noise, good clean power output, runs cool. Has run a commercial slushie machine + TV+Fans+ mini split A/C... all from solar & lipo batts. on my houseboat. so it's a good unit.

Overall really good hooked into semi under the bed powers mini fridge electric kettle ND microwave with no problems whatsoever love this and recomend to all truckers

Works better than expected. 100Amp battery charged by 100watt solar panel. I have run a miter saw, a skill saw, a table saw, lights, a jig saw and other tools and it has handled everything I have thrown at it. I have done everything I needed to do and have never run the battery down. I am pleased better than I ever thought.

I haven‘t really asked it to do a lot yet, maybe 2,000 of its rated 3500 watts, but it runs, lights, fans and a 3/4 ho motor well! Thank you!

Very pleased, especially with the very low idle consumption. Also very pleased with the buying transaction - includes price, payment, shipping, tracking and communication.

It provides exactly what I need. I use it to power my laser printer from my trunk.

Very pleased with...

My first review was based on a 20..25% load because I did not have the battery capacity yet... With 200+Ah I did now some testing: 2200 is best what I get... after that it goes right into into overload / over current and turns off... B) Temperatur management - cooling - seems to be kind-a absent: device goes into over temperature before the fans / cooling starts... and this with 30..35A / about 33% load only, but continuously (in a cool, ventilated place). ----- Since no time to return and re-source - and it was out of stock - I took a closer look. Guess what: the board is marked 2000.xxx. So no surprise it gave way at 2200W. There two (2) temp sensors (NTC): 1. Temp sensing is on heat sink on low side. Even SLOW rising temp (sinking resistance of the NTC) sends device right into over temperature without turning on the fans first. 2. Temp sensing is on one of the three (3) transformers and that sensing did not turn the fans on either. At one time though the device got confused and ran the fans full AT ALL times, right from connecting the device, even when it was 'cold' after being disconnected for hours. Moving on with own temp sensing in three (3) places: low and high side sinks and transformer using Dallas DS18B20 and PWM fan control w/ MC w/ BLE connection for monitoring I have now a 2000W continuously working device. Another things that bothers: input voltage shows one 1V too high... and there is no instructions how to calibrate. --- I still think it is a good device for a reasonable price (when you know what you do). Electronic components and manufacturing look as expected (The only issue I could see: some low resistance resistors in the low side are a bit discolored from heat... use of higher rated version would fix this issue). --- Suggestion to the manufacturer: the monitor panel should be a separate, square plate to be mounted in the front panel either for horizontal or vertical mounting of the device.

Had 2 weeks, bought from US Distributor on Amazon. Got it in 3-4 days. I have a Sub-Panel with a fail-over Contacter in my home that feeds all the 120V Circuits. This 24v/120v 3500W Inverters runs everything. Is Pure sine Wave, Mine seems to be 90% eff. Will easily start a 15,000 BTU Roof AC Unit in RV. . Replaced my 2000 Watt Inverter. Cables that come with Unit seem to be for low amp testing. Bought 2/0 3ft cables from HF to carry the load. Now I need some more batteries.