As others have stated, the ice maker unit portion comes in a couple of days by courier. The ice bin takes longer as it comes by truck due to it's size. They both came with some minor damage but they were both serviceable after straightening some dents.
It was easy to install and turn on but changing the ice thickness is a challenge. It would be a wise move for Vevor to provide a detailed manual on how to adjust settings using the digital display so we customers are well versed in adjusting the cycle.
The machine goes through a full cycle as follows:
1. The Ice maker is turned on and the controls add water as needed to keep the pump reservoir "sink" filled.
2. Ice maker runs for 2 minutes in a freezing mode then the display shows a countdown clock that is adjustable to complete the
ice freezing cycle. (I have found that setting it for 6 minutes works well for smaller cubes that break apart easily)
3. The selected countdown time ends and the ice maker goes through a harvest cycle of up to 2 minutes.
4. Sometime within that 2 minute period (usually around 50 - 60 seconds), the ice sheet is released from the Ice mold and falls
into the bin.
5. When the ice sheet falls, the plastic door in front of the mold is moved away from the mold, triggering the system to start the
cycle over again.
6. This continues untll the ice has built up in the bin to the point where the falling ice doesn't allow the door to return to it's
starting position.
To adjust the countdown timer, have the unit running. When the initial 2 minutes have counted up, the display will jump to the countdown timer. To adjust the ice thickness, press the 3rd button from the left to enter programming mode then press the 4th button from the left to increase the time by a minute and the 5th button to decrease the time by a minute. Shorter time = thinner ice / Longer time = thicker ice
Normal guy 
Christopher Alan Greene 
