VEVOR 2 Pack 1×4 FT LED Flat Panel Light, 6600LM 55W Manual

Discover the ultimate guide to your VEVOR 2-Pack 1×4 FT LED Flat Panel Light, a versatile and energy-efficient lighting solution perfect for your home, office, or classroom. This comprehensive product manual download is designed to help you seamlessly set up, troubleshoot, and optimize your LED flat panel lights, ensuring you get the most out of your investment.

With 6600 lumens of brightness and a 55W power rating, these surface mount LED drop ceiling light fixtures provide superior illumination and adjustable color temperatures of 3500K, 4000K, and 5000K. Tested to UL standards, these lights guarantee safety and reliability.

Our user-friendly manual includes step-by-step instructions, detailed diagrams, and expert tips to make installation and maintenance a breeze. Whether you’re a DIY enthusiast or a professional, this manual is invaluable for achieving optimal lighting performance.

LED PANEL LIGHT

Model: HFPL24D-50/HFPL24D-50/HFPL14D-30

These are the original instructions. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret our user manual.

The appearance of the LED Flat Panel Light shall be subject to the product you received. Please forgive us for not informing you again if there are any technology or software updates on our product.

LED PANEL LIGHT

ALWAYS TURN OFF MAIN POWER BEFORE INSTALLATION

PLEASE READ: Important Information Before Installation

This equipment is intended to be installed only by qualified personnel. The installation must be made per the current edition of the National Electrical Code and all applicable state and local building codes. The final installation must be approved by the appropriate qualified electrical/building inspector(s).

Improper installation may result in a fire or electrical hazard. Be sure the electrical power to the circuit has been disconnected before installing this electrical system.

1. Review the diagrams thoroughly and disconnect all electrical power before installation to avoid electric shock.
2. Do not mount near flammable materials or electric heaters.
3. Do not let power supply cords touch a hot surface.
4. The fixture is for indoor and dry locations. Do not use for an outdoor location.
5. The fixture shall be installed or maintained by a qualified electrician or someone familiar with the luminaires.

On-Off Wiring Steps:

1. Open the cover of the junction box.
2. Remove the round knock-out and connect the conduit or cable to the wiring box with proper connectors. AC input connects neutral to AC-N, the line connects to AC-L, and ground connects to the green wire. Using 16-gauge pigtails from the terminal block to the respective power supply wires is recommended.
3. 0- 10V Dimmable Wiring.
4. Connect low-voltage leads from the 0- 10V dimming device to the terminal block’s respective DIM+ and DIM-.
5. The following figure(1) shows two switches. The right switch is the power adjust, which has three settings, beginning to increase the power from left to right.the left switch is the color temperature adjust, which has three settings, changing the color temperature 3500K/4000K/5000K from left to right.

Universal voltage driver permits operation at 120V through 277V,50 or 60Hz. 0- 10V control wires must be rated for 300V minimum.

INSTALLATION

Recessed Installation Steps:

1. As the following figure (1): In the view of the power and color temperature switches, please move the two switches to the desired power and color temperature.
2. Turn the clip 90⁰ counter-clockwise to secure the panel
3. Connect the driver to power source
4. Insert LED panel into T-bar face down, align the panel with edge of T-bar
5. Adjust the panel to right place
6. “Mounting Hook is for positioning only” or equivalent, in Format S24-L2

Made In China.

 

VEVOR 2 Pack 1x4 FT LED Flat Panel Light, 6600LM 55W Manual