VEVOR Slip Roll Machine, 24 inches Forming Width in 16 Gauge Capacity Manual

Unlock the full potential of your VEVOR Slip Roll Machine with our comprehensive product manual download. Designed for the 24-inch Forming Width in 16-gauge capacity Sheet Metal Slip Roller Rolling Bending Machine, this manual is your ultimate guide for setup, troubleshooting, and optimisation.

Whether you’re working with low-carbon steel, copper sheets, or aluminum alloy sheets, our detailed instructions will ensure you get the most out of your machine. With easy-to-follow steps and clear illustrations, setting up and operating your VEVOR Slip Roll Machine will be a breeze.

The manual also includes valuable tips for maintenance and advanced techniques to enhance your metalworking projects.

Download now and take the guesswork out of using your VEVOR Slip Roll Machine, featuring 2 Detachable Rollers for versatile metal sheet forming.

MODEL: W-1.0X915/W-1.0X1220

Specifications

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list, and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoices safe and dry for future reference.

Safety Warnings and Precautions

WARNING: When using the tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1. Keep the work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp locations, don’t be exposed to rain, keep the work area well-lighted, or use electrically powered tools with flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep them out of the reach of children.
5. Do not force the tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments to exceed the tool’s capacity.
6. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a large industrial tool. Please do not use a tool for a purpose it was not intended for.
7. Dress appropriately. Do not wear loose clothing or jewellery as they can get caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear a restrictive hair covering to contain long hair.
8. Use eye and ear protection. Always wear ISO-approved impact safety goggles. Wear a full-face shield if you are producing metal filings or wood chips. Wear an ISO-approved dust mask or respirator around metal, chemical dust, and mists.
9. 9. Do not overreach. Keep proper footing and balance at all times, and do not reach over or across the running machine.
10. Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. The handles must always be kept clean, dry, and free from oil and grease.
11. Stay alert, watch what you are doing, and use common sense. Do not operate any tool when you are tired.
12. Check for damaged parts. Before using any tool, any damaged part should be carefully checked to determine whether it will operate properly and perform its intended function. Check for alignment and binding of moving parts, broken parts or mounting fixtures, and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician
13. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
14. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only accessories intended for use with this tool are allowed. Approved accessories are available from the distributor.
15. Do not operate the tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment of reflexes is impaired while taking drugs. If there is any doubt, do not operate the tool.

Assembly and Operating Instructions

The 36”（48”） Mighty Mini Bender requires minor assembly, as described below. When reading these instructions, please refer to the parts diagram and list shown below.

1. The Stand (#1) should be secured to a workbench using the mounting holes and 4 bolts (3/8” diameter).
2. Each Handle Ball (#7) should be attached to the Handle Lever (#6), and the Handle Levers should be placed into the Pins (#5).
3. To use the Mighty Mini Bender, lower the Handle Lever until the Moving Plate is parallel to the workbench. Position the material to be bent on the Supporting Plate (#2) and the moving Plate, and properly align it with the edge to be bent up against the back edge of the Supporting Plate.
4. Place and secure the Pressing Plate (#3) on top of the Supporting Plate, with its back edge aligned with the back edge of the Supporting Plate.
5. Raise the two Handle Levers to bend the material to the desired angle.

Warning: When using the Mighty Mini Bender, keep fingers clear of the Supporting Plate and Moving Plate to avoid personal injury.

• When not in use, the Mighty Mini Bender should be covered and stored in a dry location.

Note: The warning and instructions contained in this instruction manual cannot cover all possible conditions and situations that may occur when using this product. It must be understood that common sense and caution cannot be built into this product. These factors must be supplied by the person operating this piece of equipment.

Parts List