VEVOR Paint Sprayer, 1300W Manual

Unlock the full potential of your VEVOR Paint Sprayer with our comprehensive product manual download. Designed specifically for the 1300W Electric Spray Paint Gun, this manual covers all aspects of setup, troubleshooting, and optimization.

Whether you’re a DIY enthusiast or a professional painter, our manual will guide you through using the 1300ml and 800ml containers and mastering the 5 copper nozzles that come with this 150 Din HVLP spray gun.

Perfect for house painting, home interior and exterior walls, as well as fences, this manual ensures you achieve flawless finishes with ease. Don’t let minor hiccups slow you down; our detailed, step-by-step guide will help you navigate any challenges, making your painting projects smoother and more efficient. Download the VEVOR Paint Sprayer manual today and take the guesswork out of your painting endeavors.

VEVOR Paint Sprayer User Manual

MODEL: JS-FB13F-T

Important Safety Instructions

To reduce the risks of fire or explosion, electrical shock, and injury to persons, read and understand all instructions included in this manual. Become familiar with the controls and the proper usage of the equipment.

WARNING – To reduce the risk of fire or explosion:

1. Do not spray flammable or combustible materials near an open flame or ignition sources such as cigarettes, motors, and electrical equipment.
2. For units intended for use with only water-based or mineral spirit-type materials with a minimum flash point of 55°C- Do not spray or clean with liquids having a flash point less than 55°C.
3. Paint or solvent flowing through the equipment can result in static electricity. Static electricity creates a risk of fire or explosion in the presence of paint or solvent fumes. All spray system parts, including the pump, spray gun, and objects in and around the spray area, shall be grounded appropriately to protect against static discharge and sparks.
4. Do not use a paint or a solvent containing halogenated hydrocarbons. See operating instructions for examples of these types of materials.
5. Keep the spray area well ventilated. Keep a good supply of fresh air moving through the area. Keep the pump assembly in a well-ventilated area. Do not spray the pump assembly.
6. Do not smoke in the spray area.
7. Do not operate light switches, engines, or similar spark-producing products in the spray area.
8. Keep area clean and free of paint or solvent containers, rags, and other flammable materials.
9. Know the contents of the paints and solvents being sprayed. Read all Material Safety Data Sheets (MSDS) and container labels provided with the paints and solvents. Follow the paint and solvent manufacturer’s safety instructions.
10. Fire extinguisher equipment shall be present and working.

WARNING – To reduce the risk of skin injection:

1. Do not aim the gun at, or spray any person or animal.
2.  Keep hands and other body parts away from the discharge. For example, do not try to stop leaks with ny part of the body.
3. Always use the nozzle tip guard. Do not spray without the nozzle tip guard in place.
4. Only use a nozzle tip specified by the manufacturer.
5. Use caution when cleaning and changing nozzle tips. If the nozzle tip clogs while spraying, follow the manufacturer’s instructions for turning off the unit and relieving the pressure before removing the nozzle tip to clean.

WARNING – To reduce the risk of injury:

1. Always wear appropriate gloves, eye protection, and a respirator or mask when painting.
2. Do not operate or spray near children. Keep children away from the equipment at all times.
3. Do not overreach or stand on an unstable support. Keep effective footing and balance at all times.
4. Stay alert and watch what you are doing.
5. Do not operate the unit when fatigued or under the influence of drugs or alcohol.
6. Household use only.
7. This product is of protection class II. That means it is equipped with enhanced or double insulation.

WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS. This appliance has a polarized plug. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

SAVE THESE INSTRUCTIONS

Servicing of a Double-Insulated Product

In a double-insulated product, two insulation systems are provided instead of grounding. No grounding means is provided on a double-insulated product, nor should a means for grounding be added.

Servicing of a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to those parts in the product.

Intended Use

Coating Materials Suitable for Use

Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes, automotive finishes, staining sealers and wood sealer-preservatives.

Coating Materials Not Suitable for Use

Paints containing high-abrasive material.

VEVOR Paint Sprayer Technical Data

Parts Description

Before spraying

1. Preparing the Coating Material

Before spraying, the material being used may need to be thinned with the proper solvent as specified by the material manufacturer. Never exceed the thinning advice given by the coating manufacturer.

2. Select a correct nozzle

Five size nozzles (1.0mm, 1.5mm, 1.8mm,2.6mm, 3.0mm) are provided with this unit and can be attached according to the application. The smaller nozzle is preferred when delivering low-viscosity paint and can get a fine spray pattern.

3. Always ensure the suction tube is tightly fitted before tightening the canister.

A loose fitting may cause a sprayer problem.

4. Assemble the air hose.

Insert the hose coupler into the outlet on the base and spray gun, and rotate the coupler to ensure it seats firmly.

5. Adjust the spray pattern setting

Depending on the application and target object, three different spray jet settings can be chosen on the spray gun.

6. Set a suitable cord length

An automatic cord reel is installed in the appliance. Choose a suitable cable length by pulling out the cable according to your work. The cable can be rewound automatically by a gentle pull and release.

Pull hard to extend the length. A gentle pull can release and rewind the cable automatically.

Start your Work

1. Push the machine’s ON / OFF switch (3) and start painting.

2. Adjusting the Material Volume

Set the material volume by turning the regulator knob.

Remark: It is advisable to test the spray gun on a cardboard or a similar surface to find the correct setting.

Important: Begin spraying outside the target area and avoid interruptions inside the target area.

Spray Technique

• The spray result depends heavily on the smoothness and cleanliness of the surface to be sprayed. Therefore, the surface should be carefully prepared and kept free of dust.
• Cover all surfaces not to be sprayed.
• Correct. Be sure to hold the spray gun at an even distance of approximately.10-30 cm to the target object. An even movement of the spray gun results in an even surface quality. Part “a” in the picture below
• Incorrect. Heavy spray fog build-up, uneven surface quality. Part“b” below the picture
• When coating material builds up on the nozzle (A) and air cap(B), clean both parts with a solvent or water.

Taking Out of Operation and Cleaning

1. Turn the machine off. Activate the trigger guard so that the coating material in the spray gun flows back into the container.
2. Release the container by clockwise turning the container. Empty any remaining paint back into the material tin.
3. Pre-clean the container and feed tube with a brush.
4. Pour solvent or water into the container. Attach the container back on.
   Use only solvents with a flashpoint over 55°C
5. Turn on the machine and spray the solvent or water into a container or a cloth.
6. Repeat the above procedure until the solvent or water from the nozzle is clear.
7. Turn the machine off.
8. Then empty the container. Always keep the containers ‘ seals from coating material residue and check for damage.
9. Disassemble the nozzle parts and clean each part separately.
10. Clean the outside of the spray gun and container with a cloth soaked in solvent or water.
11. Reassemble the nozzle back onto the sprayer.

Note: The rib on the nozzle should fit into the groove in the base.

Maintenance

Change the air filter

Change the air filter if it is soiled. Release the cover fastening from the machine, and place the air filter in the cover. Push the cover back onto the machine.

VEVOR Paint Sprayer Storage

After usage and cleaning, twist the hose to the base and put the sprayer into the base.

Correction of Malfunctions