VEVOR Davit Crane, 2000lbs Pickup Truck Crane, 360°Swivel Design, Hydraulic Crane Hoist Telescopic Hoist Crane for Truck, Crane Hitch for Lifting Goods in Construction, Factory, and Transport

Crane does it's job. Unfortunately my box came tore up and was missing the hardware. called customer service kinda got a runaround on the parts. Please do your self a favor and watch YouTube videos on the harbor freight crane. It will give you an idea of what you are up against.

The overall construction seems sturdy but the devil is in the details. The reason I bought this was the range of lift. Any scissors lift that could get down to 6.75” off the ground (4.7” is BS) and up to 57” (if true) would cost much more than $550. But…as with most non-domestic mechanical items, you’d better be prepared to make adjustments/modifications to get it to work as promised. So if you’re not mechanically inclined, look out. Check all bolted connections. Some were intentionally loose because they had to be removed for final assembly (aluminum parts) but others should have been tight (winch-to-frame). One small red wheel was missing a spacer washer and the insert collar to prevent over tightening the wheel, was deformed on one end. The aluminum parts (u should file the razor sharp edges to avoid cuts) must be removed from the lift carriage to slide it into the frame. My unit binds at two locations along its range, which makes the platform tilt a bit at each. I have not figured out the cause yet nor if I can fix it. It “may” break in and be fine. I can live with it if necessary. One design flaw… the unit has four red wheels that allow it to work in a horizontal orientation, but the crank handle will contact the floor before the small red wheels. I removed the black plastic handle, cut off the smallest segment, shortened the bolt and reassembled. If while vertical, the crank handle is left closest (down) to the big wheels before laying the unit down horizontally, the handle will not hit the floor. Not so if oriented up. Winding of the cable is another whole issue that you’ll have to deal with. Wheels are of high quality. I did not receive any instructions what-so-ever. But if u need instructions, u are already in trouble. Assembly should be obvious. Over all, I am so far happy with the purchase. Good luck.

I wish that there were steel plates already designed for installation in GMC pickup trucks.

Easily install. "GREAT" customer service!! Works like a champ!!

Nice little pickup bed crane. Sturdy mounting and strong hydraulic jack. Connecting bolts (pins) are the weak point, but it's inexpensive repair to buy grade-8 bolts & spacers to correct that issue. All in all, good value.

A lot of fabrication and welding to get this to work and be secured properly in the back of a pickup. I installed a deep cycle marine battery for it and it works great.

I love everything about this product! I wouldn't change a single thing. Amazing!

Power connection simplified by tapping into wires powering car stereo. See Google for standard color codes, You Tube for radio removal info. Allow room behind display for antenna connector and power supply module. Works great. Cool feature. Looks sharp. Nicely lit.

This thing is rock solid. Going to use it to put my spare in place in my Jeep

I probably want put the crane to its maximum potential but for the heavy stuff I have around the house it works great, attached to my trailer . It loads the generator, logs , atv and other yard work stuff up with ease. The bearings in the shaft make for a easy rotation on heavy loads and helps positioning things on my trailer . Well worth the money