VEVOR SJ 300 Slip Roll Machine, Max 12inch/300mm Forming Width & 1mm Thickness Sheet Metal Roller, Manual Slip Roll with Crank Handle

I'm bending 16 gauge mild steel and it rolls nice. I've also done rod on it, with the side slots and it does a great job and cable of perfect circles. It's super manual with zero instructions. However, you can figure it out quite easily with scrap pieces. It came with broken front plastic handles, since the packaging was crap and didn't protect them enough. It's HEAVY so they prefer to not return ship it as broken, instead they refunded me to buy my own replacement handles. Annoying yes, however they provided enough refund for a couple pairs, even though they were tricky to find with zero specs, even after I asked for the specs. Regardless, it works without the handles really, the screws to adjust the rollers are smooth and easy to move. I think you get what you pay for, but overall I'm pleased because it gets the job done and seems solid and should last, regardless of the handle issue. Be aware the Vevor one is identical, I ordered this Mophorn roller, and the Vevor one was shipped to me and looks identical. In case someone is comparing, that might help with that question.

The directions consist of 2 pages one sided and include nothing about safety, maintenance, or operation. One is a blown up parts diagram and the other is just a picture of the slip roll. Upon inspection I found that when the rollers are all brought together there's a tight spot so one must be slightly out of round. I have not had a chance to see if I can compensate for it in some way. The packaging didn't seem to indicate it was damaged in shipping although the box was beaten up when it arrived. It did work for it's intended purpose as I was able to make 1 1/2" rolls for a project. I'll look deeper into it's operation later.

It worked for my job- rolls smoothy, and definitely built better than I expected.

Set up is easy

Item is as described. Just a little adjustment on the gears and it cranks perfectly. Easy to follow manual for adjustments. Packaged delivered to Hawaii in very good condition.

Amazing deal. Really. I couldn’t find another slip roll that could bend this gage for any cheaper. And besides that works like a dream. 5 starz!

The first roller I recieved was damaged in transit but the seller replaced it immediately.As for the slip roller, it does roll 16 gauge mild steel, slowly with many passes. It's really better suited for thinner material but it will work at the max rated capacity.Fit and finish is what you'd expect at this price point. The casings are rough and the paint is terrible. The bushings for the rollers clunk around in the casting.But I still give it 5 stars because this is what you should expect at this price. The Eastwood unit is virtually identical, made in China like this one, and twice the cost. I'd be extremely disappointed if i paid $500 for this quality.

The slip roller unit was well made and did an excellent job of forming 4 in. radius aluminum tiles, for installation on a church dome.

This roller is super. I just used some vice grips to hold it onto my welding table. No instructions but fairly easy to figure out. I was able to roll 24" wide copper with two passes. I paid for the machine with the first job. Amazing price and the roller worked perfectly.

After some work it works for me. The crank is way too short so I had to fab a 10" . The gear on the top roller was missing the key so it was free spinning I also had to fab one up. Tested it out on some 1/16" brass and it worked well. Also this is made to be held by vise jaws which can be convenient if you don't have much space or inconvenient if you want it in a fixed location in which you'll have to fabricate your own base and drill and tap or weld it on. For 130 bucks I can deal with that. Other than that it is pretty solid.