All

Customer Reviews

  • 4.8
  • 4.6
  • 4.6
  • 4.7
sherry Jackson sherry Jackson
1200W
Thanks
What I hoped it would be
0
Adam West Adam West
I despise lies in listings
The rpm specification is a complete lie. The rpm is 220 to 540 rpm. I figured this drill must be geared slower than the other mag drills and that would be a huge plus. Unfortunately it was deception.Why am I not sending this thing back on principle alone?The spindle run out on mine is 0.003" to 0.005". Not bad at all. I feel lucky with that...The over all travel is 8.5" and it has plenty of height to utilize a drill chuck with most jobber drills except maybe nearing 1/2".The gibs are thick and chromed and easy to adjust. Over all the quality is really not bad at all. The motor case is metal.Everthing else looks really decent. I haven't checked the motor amps but I won't be surprised if that is exaggerated too. Knowing what I know now I'd still buy it.
0
Adam K. Adam K.
980W
Good value; not top end but you get a good mag drill!
Great value- good drill; kinda loud.
0
Vernon Mack Vernon Mack
1680W
Mophorn Drill Mopped it up!
The word around the farm is that "Mophorn Mopped it up"! What took the Milwaukee drill 4.5 hours to do, the Mophorn drill did in 35 minutes. People laughed at first at the Mophorn and now Mophorn is the one laughing. I couldn't have come up with a better name. If I was to start a business, the first word that comes to mind would be Mop....and then the second most obvious word would be....Horn! Introducing Mophorn! The best name in the business when it comes to drills!
0
Daniel grantham Daniel grantham
Value
Worked perfect for the money I spent on it very happy
0
truthdog truthdog
750W
Lots of power in a small package
I purchased this drill to add coolant holes in by big block Chevy. This drill made quick work of the project and even though the magnet only had about 30% contact area it held on like crazy. Very satisfied.
0
John P. John P.
Hollycow
What an incredible drill for the price. Well made ,easy operation, you will be happy with the results.
0
Jason LaFave Jason LaFave
750W
Good tool. Shipping box was not great for the weight
This mag drill really worked for me. I needed the variable speed for line boring several bores on my bulldozer. I had to tighten up the ways on the drill when I first set it up. There is enough extra wire in the mag base to turn it 180 degrees to give more room from the drill centerline to the base. I have also used it with a Jacob’s chuck and twist drills and several annular cutters. I had no problems with the drill at all. It’s quite large and very powerful even at low speeds. I have used mag drills at work that costed thousands more than this and they didn’t even have variable speed.
1100W Electric Magnetic Drill Press 40mm Boring, 2700 LBS Force
0
fsandy fsandy
Great Machine
This preformed very well. I needed to make an adjustment to a motor mounted on a piece of steel and there no room for error. This preformed perfect. Easy to move and very accurate when magnetized. I was very happy with for the price.
0
Derek Copeland Derek Copeland
Very good buy
Used this drill for the first time this week. Had to relocate a pintle hitch on log truck. This drill worked flawless and just as good as name brand drills. I drilled through 1” pintle plate without any trouble. I will be using it often so I hope it holds up but as of right now, very satisfied with it.
0

People Who Bought This Item Also Bought

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7; Saturday to Sunday, 08:00 - 15:00, GMT-7 ©2009 - 2022 VEVOR All Rights Reserved