All
Account
Non Stop Horizon Non Stop Horizon
Some Informtion
Just got the 6 in version. The thread to the drill is 1-1/4 7tpi in spite of the 1/2 BSP in the spec, so that is the good news. The supplied drill is a couple of inches shorter than standard, so it would make it through a 12 in wall, but not a 14 in like the standard drills. The column is JUST long enough to accept a standard drill without having to block the base off the surface. The machine is NOT variable speed. It has an on/off switch only. Not the end of the world, but be aware. The label on the motor says 110V 50 Hz, so clearly a product made for the China Market and only slightly reprocessed (it has a US standard plug). It is a universal motor, so the 50/60 Hz thing should not be an issue, but 120V will probably be pushing it a bit. The flip side is that it should be happy on a fairly long extension cord and since it draws 20 Amps, that may be a good thing. Haven't had a chance to drill with it yet, but it looks workable and it is about half the weight of my 10in drill, so a lot easier to horse around for smaller holes. I got it for the 1" to 3" stuff because my big drill doesn't run fast enough to be efficient with small drills and I think it will be fine for that, but the whole setup is pretty light for anything bigger than about 4 inches. My big drill is a predecessor to the Bluerock line and it has been a beast, but it is heavy.
0
Non Stop Horizon Non Stop Horizon
High Quality, Solid, Good Value
Seems like a great product at a great price. Have not actually used it yet, but the visible quality looks solid and reliable.Item arrived damaged, but it was due to shipping damage. It's quite heavy and awkward and the delivery people or machines messed up the packaging. The main base, although solid metal, had a piece broken off. However, the shipper/manufacturer was very responsive and immediately sent me a replacement base without further action or cost on my part.Very satisfied with my purchase.
0
Non Stop Horizon Non Stop Horizon
Four Stars
good product works better than expected and price was good
0
Chris Chris
Works
Cored a 4" diameter hole through 10" of concrete and precast deck without an issue. Make sure to keep it well flooded with water - if the diamond loads up you can overheat your cutter.
0
Charles B. Charles B.
Did the job.
Dont know how long it will last. Did 6 6 inch holes just fine. Cheaper then renting.
0
Rodrigo Anchico Rodrigo Anchico
Equipo robusto
Equipo robusto, se esta usando y responde con potencia
0
Stuart Stuart
Works great and cheaper than paying someone for what you're use this for
Product works great. If you think you need this keep in mind it is for very advanced DIYers; not this product in particular but almost any core drills really.
0
juan garza juan garza
Very good for the $
Great tool for the money
0

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7