All
Account
truthdog truthdog
Lots of power in a small package
I purchased this drill to add coolant holes in by big block Chevy. This drill made quick work of the project and even though the magnet only had about 30% contact area it held on like crazy. Very satisfied.
0
RODNEY MCCARTY RODNEY MCCARTY
VERY GOOD
love it works great
0
toth welding toth welding
Great deal
This is a good drill for the price. I did put loctite on the adjustment screws and the handle. I drilled 3 holes in my 1/2 in thick steel table with the bits that came with it and I'm extremely happy with this drill.
0
Vevor Customer Vevor Customer
Perfect for the job
Perfect for the job
0
Robert Beretta Robert Beretta
Mistaken
I mistakenly put a bad review for this seller....it was meant for another seller...
0
Shop Teacher Shop Teacher
Good for the price
So far so good, week 2 of using this on a project. No real issues have arose, have some centering problems but I just loosen and retighten the Allen screws and good to go. Use plenty of lubricant. Noticed that the smaller anular bit was showing signs of overheating. Magnet has plenty of pull, used it on a 1/4" wall it held fine while cutting holes. For a person who will use this from time to time it's a good price point to get into a mag drill.
0
Mike Henry Mike Henry
Great value for the money.
This tool preformed extremely well right out of the box. The operating manual was not very good.
0
Fred Smith Fred Smith
Worked great!
I really like being able to adjust it up and down to fit different sized drills. Seems to be very well made. Drilled several hundred holes in steell plate without any issues.
0
Gary McCann Gary McCann
Nice size
I like this because of it's small size, but large chuck capacity. Also it's light enough to move easily and it's a good value for the price.
0
Tool Tool
Drill worked great!
Worked great to linebore new 2" holes for bushings on my backhoe bucket!. Easy to setup. plenty of power. 300rpm speed. Carbide bit cut through more than 1" of steel with a 2" hole in a couple minutes. Magnet worked great! Needed a couple of extensions due to the distance between the holes, but the mounted easily and still had a full 8" of travel. Would buy again.
VEVOR 980W Magnetic Drill Press with 1-1/3 Inch (35mm) Boring Diameter Magnetic Drill Press Machine 2700 LBS Magnetic Force Magnetic Drilling System 680 RPM Portable Electric Magnetic Drill Press VEVOR 980W Magnetic Drill Press with 1-1/3 Inch (35mm) Boring Diameter Magnetic Drill Press Machine 2700 LBS Magnetic Force Magnetic Drilling System 680 RPM Portable Electric Magnetic Drill Press
0

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7