VEVOR US EN
Select the country/region, language, and currency you prefer for shopping.
Delivery to
Your Address
Hello, Sign in
Account & Order
2-day Free Delivery 30-day No-hassle Returns 12-month Warranty

Customer Reviews

  • 4.8
  • 4.6
  • 4.6
  • 4.7
Allan Thompson Allan Thompson
15 L
Mr
Thot it would be bigger. But it did what I wanted it to do barely. Good product said 15L should be 3.96 us gallon. Not quite 3 gallon to fill full. But then you have to fill to line to have room for you part to fit so you have no over flow. Barely got my parts in it. Did an amazing job cleaning. Pretty happy with it.
0
VEVOR Customer VEVOR Customer
15 L
Working great
0
Deanzie Deanzie
6 L
Loud but effective
I feel like if I were making something that vibrates out of all thin metal parts, I would use thicker metal, or use sound deadening on the inside of the exterior walls
0
Reloading ammo since 1975 Reloading ammo since 1975
3 L
Sandpoint, ID.
I use this exclusively for cleaning brass cases (for Reloading ammunition). I bought it as a replacement for a Hornady Sonic cleaner when its electronics failed on me after only moderate use. So far I am pleased with this cleaner/unit. Two points: First It would be nice if temperature reading had a Fahrenheit (as well as the Celsius) setting or display. Second the stainless steel mesh basket in the tank is to coarse of a mesh/weave. It allows smaller cases to slip through. I use the old units mesh basket that has a tighter mesh/ weave. Longevity will be the ultimate judge
0
greeson greeson
6 L
fantastic
Can't say enough good things about this machine. It did a awesome job of cleaning the items we used it for.
0
Frank Frank
10 L
6L Vevor unit is giving great results! Recommend!
I have been using this heavily for about 6 months and is working great. Triple Carbs from boat Moto to tools and everything in-between. I even put in the wool polishing pads from orbital polisher and they came out like new. Tip! - Fill unit with water and put everything into GLASS JARS with your cleaning solution and float them on the top of the water. The unit stays clean and the items get just as clean as they would inside the unit. (pulses go right through the glass) Don't use Plastic it doesn't work very well. It is easy to separate items this way and to use different cleaning solutions in each of the different size jars. Experiment a little, OK? You end up saving a ton of money on the cleaning solution as you only use a tiny bit in the jars. Put a plastic trash can under your work bench to drain your unit into after use to keep it dry. My unit looks like new because I have never put anything dirty inside it, only in jars in the water bath. I will be looking to install some sound deadening material to the inside walls to help with the noise issue and will report back on that once completed. So Far so good. Cheers!
0
Retfire Retfire
2 L
So far so good
Purchased for cleaning brass and old carbs. The heater worked great, I primed it with hot water and it kept it really hot. Cleaned brass better than expected after 5-8 minute runs. Hopefully it lasts.So far so good!
0
lwthefish lwthefish
6 L
best one I've gotten
Man oh live this thing cleans. Best yet I can clean it out. The drain is a dream for cleaning. And does it get hot yes it does. I PUT A PAIR OF VERY RUSTY VERY OLD VISE GRIPS IN AND WOW.
0
Neil Neil
3 L
Great little ultrasonic cleaner!
Cleaner was a little smaller than I expected, but not much. It's a good general size. It's simple to operate -- set the temperature and turn it on, set the time and turn it on. Only issues I have are that the heat is very slow, and it shuts off after a clean. I'd love for the heater to remain on after a cleaning cycle, so I could just keep it going in the shop without a thought while working. But I assume this is for safety or some such. It's easy enough to just hit the button and turn the heater back on; it's just a step I'd prefer to avoid. Also, it's a bit loud, but only because the lid is thin aluminium and rattles on the top while cleaning. A rubber gasket or some such will solve that issue. The manual is filled with CYA danger warnings: don't plug it in when you're not using it. Unplug it immediately after a clean. Etc, etc. Seems a bit much, but we live in a society where you have to put those things in. Overall, though, it does a FANTASTIC job at cleaning. It's easy to use. And I'm pleased I picked it up. A great addition to the shop.
0
Ken Ken
2 L
Great for carbs and small motorcycle parts
Bought for working on my bike/s. Good deal and worth the money.
0

People Who Bought This Item Also Bought

TOUGH TOOLS, HALF PRICE