Customer Reviews for VEVOR Sheet Metal Brake 3-In-1 12-inch,Shear Press Brake 20-Gauge Capacity,Combination Sheet Metal Machine Solid Construction,Shears and Slip Roll Machine for Shear Bending Rolling

The tool arrived well packaged and undamaged. I had a small boat project waiting for it, and the tool arrived needing no immediate adjustment. The sheer worked perfectly on 0.050" aluminum. The slip roller needs some patience, but I think that is typical, especially when making non uniform curves. I can recommend this tool for the advanced hobbyist.

Upon reassembling everything, it becomes very apparent where all of the adjustments are. I was able to fine tune it and it works great. I tested it with 22 gauge steel and it handled it. I’m currently using 24 gauge aluminum and it cuts, bends and rolls like butter. I’m just doing some arts and crafts projects and this thing works perfectly for me.

Overall, great, little machine for the price. Easy to put together, needs a bit of clean up, works nice for my needs.

It comes covered with oil to prevent rust in transit. A few paper towels and it's clean and shiny. Don't crank the crank until the blade is adjusted correctly or you may damage the cutting edge. Have fun.

Used to cut 1mm aluminum and plastic sheets. Just needed a little adjustment to the perpendicularity of the guide.

This is my birthday present a day early (wasn't supposed to get it until next week). It shear cuts, rolls and bends. Got it half price off Amazon as an open box (everything was there). The bonus... 2 inch black EVA foam the tool came packaged in. It cuts like a champ... very worth the money for light gauge metals. Very accurate.

Thank you for fast delivery. Husband says it really does the job. Stay safe.

I still need to learn how to avoid over bending and under bending. I was under the impression that the bend angle would be fixed at 90 degrees max, but either it takes some practice or I’m just doing it wrong. Could use more instructions. Shearing works very well. Good overall quality for the price.

For me it’s great, but I don’t cut metal. I use it to cut printed circuit boards. It cuts smoothly. I also don’t use the rollers. For a metal shop I’m not a good reference. It is small and fairly easy to move, but is heavy.

Took a little bit to get it all tweaked to work accurately after the travel vibration. No complaints on its construction.