Customer Reviews

Curtis Reinhardt Curtis Reinhardt
Decent for the price
Well made, install took a few hours because I removed the table and slides. You could do it without removing table. But I wouldn't. Very happy so far
Artemio Cespedes Artemio Cespedes
150 mm
Great deal!
I bought three scales for my little mini-mill for the X, Y, and Z-axis, and have to say I thought these were a great bargain. They come with mounting brackets, scales covers, mounting screws, and end covers for the scales which was an unexpected surprise. Be aware that although these scales are advertised as Mophorn, they are labeled Vevor which was fine with me because they are of decent quality. Mounting the scales required some creativity, but that would be with any brand. Make sure you measure correctly for the length and keep in mind it will be easier to deal with a scale a little too long than one that is a little too short. The 3-axis display appears to be a more solid display than the Cozyel brand I have on my larger mill. Packaging was excellent and shipping was on time. The only negative was the display didn't have a ground wire in the package, but that wasn't a big deal since I made one in quick order.
Scott T. Scott T.
A great, and cheap addition for my lathe
I used this on my 13-inch, Sheldon lathe. After some pondering, I was able to mount it to the cross slide using some existing holes. Works as it should and takes the guesswork and error out of that mechanism. Easy to read, [great for these ageing eyes] I am considering buying a longer one for the carriage.
Norma Norma
200 mm
My DRO readout is accurate and reliable again!
I was loosing my Zero point on my X-axis, so I bought the 800mm one based on the recommendations of others.
Dbl D Dbl D
Great product!
These work great there is a little bit of creativity needed to install but when they are in they work excellent! They are very accurate as well I would definitely recommend them!
miguel gallegos miguel gallegos
550 mm
I works great!
It came very quickly And worked perfectly.
Kim Kim
750 mm
Even if you have a simple drill press, get one these, install it and thank me later!!
Easily mounted cause we had one just like it before but had a major fire which melted rvery piece of plastic in our shop, but its a nice, easy installation with some planning and double and triple checking before you tighen up everything, yes it is on a drill press converted to a mill but its simple and really like the fractional mode!!!
Celia Celia
Great inexpensive DRO
I don't need machine- tool tolerances for my mortising machine, but this DRO is plenty accurate enough for me! It works flawlessly in my application so far, several weeks.
Cerisecons Cerisecons
100 mm
Plug and play
These scales are as good as the best on the market and some for a fraction of the price.
500 mm
Nice version of industry standard scale at a good price
855-385-1880 Monday to Friday, 08:00-17:00, GMT-7 ©2009 - 2022 VEVOR All Rights Reserved