All
Account
Mark Mark
3 frames
Much better than anticipated.
First off I had reservations on ordering from a different company than usual, but the price swayed me. Then I figured it would ship late or not at all, it was delivered the next day. The quality was much better than expected, much better than what the price dictated. It also appears that they have made the legs to fit a 5 gallon bucket. From where I stand you really can't go wrong with this extractor.
0
HoneyBee2022 HoneyBee2022
3 frames
3-Frame Honey Extractor
3-Frame honey extractor arrived quickly & features were exactly as advertised. First time using extractor was very good. Extractor did a very good job spinning the 3-frames with manual turning crank. Found a user must position all 3 frames in exactly the same orientation/position or the extractor would wobble a little bit. When frames positioned correctly it really did a fine job. Excellent value for stainless steel item at this price.
0
Lane Dumser Lane Dumser
3 frames
Decent enough for the money. Works well.
For the price of this unit it’s a good next step, maybe not the final step for a growing beekeepers toolbox. You must be mindful of the equipments needs. When you get it, take out the 4 small screws that hold the gear box together and add some food grade grease to the gear mechanism. It will be dry (no lubricant) from the factory and the teeth on both sides of the drive are made of a non high carbon hardened steel (softer metal wears more easily) so without lubricant I would expect rapid and possibly catastrophic failure to the unit with not to much use. Remember it’s always important to lubricant your tool if you expect it to last for many years to come. Replacing the four screws is as simple as they came out although the housing mechanism only goes back together on the same 4 sides as it came apart. Be mindful not to strip your screws out. The plexiglas is completely removable and nice that way when you go to clean it afterwards. The drum is stainless type metal. It could be thicker but it will be perfectly fine for the money. The leg mounts are spot welded to the drum. Tighten, don’t over tighten them. The additional holes in the bottom of the three feet to affix to a surface will also make the unit more stable and less wear during use and I recommend that you use them if even bolted to a heavy duty pallet with a 3/4” topper floor. I couldn’t find any instructions in the box but that being said, pulling two strips of coating over the plexiglass top and screwing three bolts with washers into the obvious spots where legs would go and are shown in all the advertisements, tightening the bolt already threaded and started in the handle after placing the handle on the crank shaft and adjusting two wing nuts on the top that were installed at the factory is a complete no brainer that even the most backward thinking ding dong should be able to see from a distance. Everything else is already in place.In the video I put three used and recently repaired frames from one
0
wannabee wannabee
4 frames
satisfied
Great delivery time. Very happy customer......until now. 100 characters to comment....name is not steven king wth?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? bye
0
Dennis Hammond Dennis Hammond
3 frames
Impressive!
I felt it was impressive for what you get for the money. I figured out real fast I could use my drill to spin it. However too much speed is uncontrollable!
0
Carlos Carlos
3 frames
Great quality
This extractor really exceed my expectations, quality is exactly the same as the doubled priced name brand, arrived fast no issues during shipping easy to assemble very happy with this investment couldn't ask for better.
1
Alan Benton Alan Benton
3 frames
Great Extractor
This extractor is better than I expected. Quite sturdy and got here very quickly. Great product, well worth the money.
0
Judith Mathias Judith Mathias
3 frames
It is a Christmas present and hasn't been used yet. Shipping was extremely fast. Thank you.
0
Tim Sebenaler Tim Sebenaler
3 frames
Honey Extractor 3 frame
The extractor exceeded my expectation. Easy assembly and performed well. I did bolt the legs to a board which added much stability. The inside edges of the legs are sharp. Definitely a keeper!
1
Johnny Miller Johnny Miller
3 frames
Honey Extractor
This extractor works very good. No complaints. Good quality!
0

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7