All
Account
Patricia Blackburn Patricia Blackburn
3 L
Fantastic machine!
I can not believe after all these years, I finally bought this. I cleaned a carburetor, and you would not believe how much dirt and grime I got out. I can put gears, gun parts, trigger assemblies, wheel cylinders. Every garage should have one.
0
Eric R. Luna Eric R. Luna
30 L
Exceeded my expectations
I purchased this when I was rebuilding the carburetors on my motorcycle - as they say, a picture is worth a thousand words. The attached image is the 'before and after' (twin carb bike). And while I did brush away some of the easier to remove dirt, the ultrasonic cleaner (along with some orange Zep degreaser - it did not adversely affect the aluminum) took it from the two extremes shown.When I started the unit up I decided to help out the heater and when I was mixing up the degrease solution I used hot water - I figure let's give this thing every change of living a long life.While I figured this thing would do something, I just could not believe how much it would do. I wish I had this thing years ago, my hands don't like doing the scrubbing and polishing any more.
VEVOR Industry Ultrasonic Cleaner 3L New Stainless Steel Heated Heater w/Timer
0
Elliot Elliot
15 L
Good choice
Been using for a month now Love it. Looks good easy to use and is big enough to put a rack of carbs in.
0
Amazon Customer Amazon Customer
10 L
The best I've ever used.
This unit really works well. I clean fuel injection nozzles from my race cars in it, and it's the absolute best I've ever used.
0
Klee Klee
0.8 L
Vevor 08l Ultrasonic cleaner
I like the quality, looks just like at the jewelry stores in the malls. Works great will use alot, time will tell how long it will last, my fake jewelry is the shiniest it has ever been.
0
Justin McGlamery Justin McGlamery
0.8 L
Outstanding performance thus far
Bought it to clean new parts. I've run it for about 6-8 cycles and am very happy with it so far. Highly recommend buying if the size is what you need.
0
Non Stop Horizon Non Stop Horizon
2 L
Perfect Size, Perfect Results
I restore vintage mechanical clocks as a hobby. This VEVOR model ultrasonic cleaner is approximately gallon-sized. It has plenty of space to immerse the wheels, gears, pallets, plates and miscellaneous parts of a typical vintage brass clockworks from the 1800s and 1900s. With an appropriate ammoniated cleaning solution, the parts come out shiny and clean as new, after only four minutes. 100 years of oil, tobacco smoke, grease and grime gone in 240 seconds!For smaller jobs, I can fill the tank with a gallon of water and a teaspoon of dawn dish soap, then put cleaning solution in a small "auxiliary" jar, add the parts to the jar, screw on the top, put the jar in the included immersible basket, set the basket in the water, and three minutes later I have "new" parts! This conserves on cleaning solution.I'm very pleased with this product, and have no complaints.
0
ChrisP ChrisP
30 L
It works great.
The unit is well built and works great, but it does take a while to heat up. It maybe could have had a larger heater based on the liquid volume it has. As far as cleaning ability, it does a great job.
0
Non Stop Horizon Non Stop Horizon
10 L
Good quality and fair price
I have been using this as a sonicator for graphite exfoliation in my experiments in my hobby lab. It works great and is a good value.
0
Non Stop Horizon Non Stop Horizon
3 L
Powerful Little Machine
I unboxed this machine and directly got to playing with it. I had watched many videos and took note of many handy tips. I purchased this unit specifically for a motorcycle custom build project. The motorcycle is a 78 Honda and requires a lot of rust removal and cleaning of the parts. I bought some inexpensive plastic ware with lids as a way to test out many different cleaning agents without the need to drain and clean the tank after each use. Filled the tank partially with HOT water. Test 1 was with old bolts, gas cap and screws that were covered in rust and grime. I filled a plastic container with Pinesol and submerged the pieces, sealed the lid and placed in the ultrasonic cleaner until it was below the water line. Set for 5 minutes and walked away. They came out much cleaner. Test 2 I rinsed with hot water and placed them in the next container filled with Rust Remover, placed in the cleaning unit, set for 10 minutes and walked away. Holy Cow! They came out looking brand new. I plan to test out different agents on different items to be cleaned but I am thoroughly impressed.Tips: * Partially fill unit with HOT water * Place items to be cleaned in ziploc bag/glass jar/plastic container filled with cleaning agent * Place container in water bath until pieces are submerged below water line * Rinse off with hot water and dry immediately after cleaning * I prefer containers that the cleaning agent can be sealed and reused as opposed to disposing of after each usePros: * Ready to use out of the box * Includes hose and clamp to make draining easier * Includes rack and tea decanter ball for small parts * Not nearly as loud as many reviews had me to believe * Makes quick work of small jobs that would take hours of tedious workCons: * Slow to heat up (TIP: fill with HOT water) * 10 L unit was not nearly as big as I had pictured in my mind
0

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7